Universal Remote Control URC-WR7, OCE-0085A manual SimpleSound Total System Volume Control

SimpleSound™ Total System Volume Control

SimpleSound is one of the most exciting fea- tures of the WR7. It gives you total volume control over ALL the components in your sys- tem, even those that do not have built--in vol- ume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and incon- venience of constantly switching between component modes just to control volume.

First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio compo- nents (such as a Surround Sound Receiver or Home Theatre system).

Now, let’s set--up SimpleSound. Here’s how:

STEP 1: Press and hold the button that corre- sponds to the Component you want to add vol- ume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three seconds until the component LED light turns on.

IMPORTANT: You have 30 seconds to per- form the next step while you are in program- ming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

COMPONENT

BUTTONS

SELECT

Page 25