Universal Remote Control OCE-0085A, URC-WR7 manual Erasing MacroPower & Other Macro Commands

Erasing MacroPower & Other Macro Commands

STEP 1: To erase MacroPower commands on the POWER [ON] or [SYSTEM OFF] but- ton, press and hold either the POWER [ON] or [SYSTEM OFF] button and the [MUTE] button simultaneously for two seconds until the current status component LED turns on.

IMPORTANT: If you don’t proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over.

STEP 2: Press the CHANNEL UP [CH	]
button to erase and exit Erase mode. The
component LED light will blink three times	to
confirm the erasure.

POWER

ON

SYSTEM

OFF

CHANNEL

MUTE UP

NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combina- tion with the [MUTE] button.

Page 32