Universal Remote Control manual Programming WR7 using Pre-Programmed Codes, Quick Set-Up Method

Programming WR7 using Pre-Programmed Codes

There are three ways you can program your WR7 using the component brand codes that are pre-programmed into the remote.

•Quick Set-Up Method

•Three-Digit Code Entry Method

•Auto--Search Method

The Quick Set-Up Method is a unique new fea- ture that enables the fastest and easiest set-up by using one-digit codes for up to 10 major brands for each component. The Three-digit Code Entry Method allows you to set-up the WR7 using 3-digit codes for component brand names. It is also a fast and easy way to pro- gram the remote. The Auto-Search Method scans through all the brands in the remote con- trol, one at a time. It should be used when either the Quick Set-Up or Three-Digit Code Entry Methods do not work.

* * *

Quick Set-Up Method

STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.

STEP 2: Point the WR7 toward the compo- nent that you want to program (in this case the TV set) and press and hold the compo- nent button (in this case the TV button).

While holding down the compo- nent button, begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3…0 until the component (in this case the TV) turns off.

Page 9