OSD (On-Screen Display) Control “Punch Through”
This “punch through” enables you to program the WR7 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control.
STEP 1: Press and hold the component but- ton you want to add OSD Control to, such as [TV] or [VCR], and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
IMPORTANT: You have 30 seconds to per- form the next step while you are in program- ming mode. If you do not press a button with- in 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the [MENU] button. The component LED will blink once.
COMPONENT
BUTTONS
SELECT
MENU
STEP 3: Press either the [CABLE/SAT] or [DVD] button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.
Page 29