AUX Function: Programming
a 7th Component
After you’ve finished programming the WR7 for six primary components and you did not use AUX, you can take advantage of the AUX function to program a 7th component, such as a second TV, DVD, or any other audio/video component that you may have in your system. Simply program the [AUX] but- ton in the same manner as any other component using either the Quick
Finding a Component’s Set-up Code Number
If you used the
STEP 1: Press the component button you would like to verify and the SELECT [SEL] button at the same time for two seconds until the selected component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in pro- gramming mode. If you do not press a but- ton within 30 seconds, the component LED light will turn off.
The remote will exit the programming mode and you will have to start over.
COMPONENT
BUTTONS
INFO
SELECT
Page 19