Mitsubishi Electronics HS-U748 manual Setting Up Your VCR, Selecting the On-screen Language

Setting Up Your VCR

Your VCR comes with MitsubishiÕs exclusive on- screen operating system. This system has been developed to simplify the operation of your VCR with clear, easy-to-understand language and design.

Before your VCR can receive television channels or you can program your VCR to record, you need to memorize all of the channels you can receive into your VCR and set the clock.

Fortunately, your VCR makes this an easy process with our menu system.

When using the on-screen menus, use the ADJUST buttons to move the highlight bar up or down and to change the setting of selected features. Press the ENTER button to enter a selection or adjustment. Press the CANCEL button to cancel or clear a setting.

Selecting the On-screen Language

You can set your VCR to display on-screen messages, menus, and functions in English or Spanish. You will do this the first time you use the menus or set any audio and video functions.

1Make sure you are viewing the picture coming from your VCR. Press MENU on the remote control. If this is the first time the menus have been used, you will see the menu for selecting the on-screen language.

2Press ADJUST buttons on the remote control to highlight the desired language.

3Press ENTER on the remote control. The menu will change to the VCR Main Menu.

4Press MENU to exit the menus.

IMPORTANT

The Select Language menu is unique. While all other menus can be accessed at almost any time, the Select Language menu will not automatically appear again after it is first set. To see the Select Language menu, press the TIMER RESET on the back of the VCR, then follow the procedure above. The Select Language menu will also appear after an extended power failure.

4	5	6
7	8	9
	0

Press to	Press to
Cancel	Enter
CANCEL	ENTER
	ADJUST
	Press to
	Select
	ADJUST

Select Language￿

￿

ÄEnglish￿ ÄEspa–ol￿

￿

￿

º¹MENU to go back￿

¶¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

12