Mitsubishi Electronics HS-U748 manual Selecting S-input Setting

Page 24

Recording

IMPORTANT

For the best quality recording, use S-VHS tapes and record in the S-VHS format.

The quality of S-VHS ET recordings will vary by the quality of VHS tapes used. For the best quality S-VHS ET recordings, it is recommended that you use HG grade tapes.

S-VHS recordings can be played on:

¥S-VHS VCRs

¥VHS VCRs with S-VHS Quasi playback capabilities

S-VHS ET recording can be played on:

¥S-VHS VCRs (not all S-VHS VCRs will be able to play S-VHS ET)

¥VHS VCRs with S-VHS Quasi playback capabilities Please use this VCR or S-VHS VCR with S-VHS ET mode to playback the tape recorded in S-VHS ET for better picture quality.

Selecting S-input Setting

To watch the picture from the other equipment that is connected to the HS-U748 rear panel through the VCR, you have to select the S-video input jack or video input jack that matches the equipment.

1Press MENU on the remote control. VCR Main Menu appears.

2Press the ADJUST buttons on the remote control to select S-VHSSet-Up. Press ENTER.

3Press the ADJUST buttons to select Rear S-input.

4Press ENTER to select which input jack to input.

¥select OFF when you want to input signals from video input jack.

¥select ON when you want to input signals from S-video input jack.

5Press MENU twice to exit the menus.

ÈS-VHS Set-Up￿

￿

 

 

ÄS-VHS Auto record

ON

 

 

ÄS-ET record

 

Auto

 

ON

 

 

ÄRear S-input

 

 

 

ON

 

 

￿

 

 

 

 

 

￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to change￿

· ¹¹ADJUST to select

OFF￿ OFF￿ OFF￿

22

Image 24
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-U748 SmartShortcuts Important Safeguards VCR Hooking Up Your VCR Unpacking Your VCRChoosing a Hookup Antenna or Cable System withoutCable Box Cable System withSwitch OUT Cable box Connections to TV with Audio Video Inputs Connections to Home Theater Receiver Setting Up Your VCR Set upPlayback TV with Audio/Video InputsOperating Your Remote Control Loading a TapePlaying a Tape PlaybackUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Selecting the On-screen LanguageSetting Up Your VCR Memorizing Channels AutomaticallyAdding and Deleting Channels Selecting a ChannelCable antenna Cable channels 1Ð125 Selecting channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄTime Recording Recording a Current BroadcastUsing One-Touch Recording OTR If you program too much time into the OTR timerRecording How OTR affects other controlsRecording Using Standby One-Touch Recording OTR2 Using S-VHS Set-Up Menu Selecting Recording FormatSelecting S-input Setting Using Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Descriptions of Video Functions Selecting and adjusting the audio and video functions PerfecTape¨ PerfecTapeTimer Recording Conventional VCR Timer RecordingConventional VCR timer recording Timer Recording Canceling a recording in progressQuick Program Changing while programmingTimer Recording Hints Program skip using menus Auto speed programmingProgram caution TV programs that end on the day afterProgram skip using the Power button Changing timer recording settingsMemory backup Editing Features Using Two VCRs to CopyUsing the HS-U748 to record from another VCR Editing Features Using the HS-U748 to playback to another VCRAdvanced Features Still adjustmentAdvanced Playback Controls Special effectsAdjusting the Tracking Advanced FeaturesSetting the counter Time CounterSearching Techniques Quick search CM skipSpeed search Counter zero stopIndex search Automatic index marksManual index marks Search to blank Repeat playbackDisplaying the Time Gauge and the Remaining Time Displaying the Current TimeTo make the time gauge and the remaining time appear Auto power save auto-off Customize Choices MenuVideo mute Setting up Auto PerfecTape Using PerfecTape¨ automaticallyRF converter PerfecTape¨Using PerfecTape¨ manually Rental XpressUsing the remote control to operate your TV Setting up your remote control to operate your TVAdvanced Options To program the HS-U748 to respond to VCR-B signals Operating your TV with the HS-U748 remote controlTo program the HS-U748 to respond to VCR-B signals To reprogram the HS-U748 to respond to VCR-A signals againRemote Control Location of ControlsLocation of Controls Front Panel Location of Controls Front Panel Display Rear Panel JacksImportant Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex Eject buttonGu’a de Operaci-n B‡sica de la Videograbadora Funciones b‡sicasGu’a de Operaci-n B‡sica de la Videograbadora Mo poner el relojMo programar la videograbadora para grabar Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call