Advanced Features
repeat playback
You can playback a section of tape over and over using repeat playback. The tape will play until the next index mark, rewind to the previous index mark, and resume playing. If there is only one index mark on the tape, then the VCR will play or rewind to that mark and resume playback. If there is no index mark, the entire cassette will repeat.
1Press AUDIO/VIDEO on the remote control to display the function menu. Press AUDIO/VIDEO until the Repeat play function appears.
2To start the playback, press ENTER.
When the VCR encounters the next mark or the end of the tape, it will automatically rewind to the previous mark and begin playback again.
The VCR will also search for a blank section of tape. If the VCR encounters any blank sections longer than 4 seconds in length, the repeat playback will begin.
3Press STOP to cancel the repeat.
Search to blank
This feature allows you to find the end point of the recorded part of the tape. The VCR will stop automatically at the beginning of the blank section of a tape.
1Press AUDIO/VIDEO on the remote control to display the function menu. Press AUDIO/VIDEO until the Search to blank function appears.
2To start the search, press ENTER.
When the VCR encounters the blank section of a tape, it will automatically stop.
IMPORTANT
This feature may not work if the blank section is within 5 minutes or less (15 minutes or less in EP mode) from your current position.
VCR
Repeat play
Use ENTER to start
VCR
Search to blank Use ENTER to start
40