Mitsubishi Electronics HS-U748 manual Trouble Checks

Trouble Checks

Problem	Try This...
The VCR timer recording does	¥	Check that the programmed recording light lights up in the front panel
not operate.		display.
	¥	Check the clock time.
	¥	Make sure you have turned the VCR off before the start time.

Noise in the picture and distorted sound.

¥ Check the tracking control. Adjust manually if necessary.

Poor or no Hi-Fi sound.

¥Check the monitor settings.

¥Check the quality of the video tape.

Playback is noisy or Òsnowy.Ó	¥	Try automatic head cleaning.
	¥	Clean the video heads using a dry-type video head cleaning cassette.
		Do not use a wet-type cleaning cassette, as it may damage your
		VCR. Excessive use of a cleaning cassette could shorten head life.
		Follow the cleaning instructions carefully.
	¥	Have the VCR video heads cleaned by a qualified service technician.
VCR remote does not function.	¥	Check that VCR operational setting is set to VCR-A.
	¥	Check to see that the VCR/TV slide switch is set to the correct
		position.
	¥	Change the batteries.
The fast forwarding/rewinding	¥	In order to protect your tapes and the VCR heads, the Fast
speed is slow.		Forwarding/Rewinding Speed will be slower than 500x under the
		following conditions:
		1 Use of tapes shorter in length than T-120 (for example, T-30, T-60,
		T-90).
		2 Activating fast forwarding or rewinding from the middle of the tape.

52