Timer Recording
Program skip using the POWER button
If you have entered only one program into your VCRÕs memory, you can skip the program without going into the VCRÕs menus. Simply press POWER on the front panel once. The programmed recording light will turn off, and the program will be skipped. If you decide not to skip the program, press POWER on the front panel twice, the programmed recording light will light up again.
Changing timer recording settings
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to change. Press ENTER. You will see the Program to record setting menu.
3Press ENTER repeatedly to select the item you wish to change. Use the ADJUST buttons to change it. Then press ENTER repeatedly to return the altered program to the Recap screen.
4Press MENU twice to exit the menus. Then press POWER to turn off the VCR. Make sure the programmed recording light is on.
Recap screen
ÂProgram to record
CH | DAY | ON | OFF |
¤ 2 | MO11 | 11:30am | 1:30pm SP |
| º¹MENU to go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
ÄChannel | 2 | ||
ÄDay |
| Monday 11 | |
ÄStart time | 11:30am | ||
ÄStop time | 1:30pm | ||
| ÄRecord speed | EP | |
º¹MENU to | go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
Canceling a timer recording before the recording starts
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear on your screen. Use the ADJUST buttons on the remote control to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor next to the program you wish to cancel.
3Press CANCEL. The program is erased.
4Press MENU twice to exit the menus.
TIMER RESET
You can use TIMER RESET on the rear panel to erase both the clock and all timer recordings.
To use TIMER RESET, press it with a pencil or a ball point pen. The power will turn off and the clock will be cleared. All timer recordings are erased.
If you have set the Clock set setting of the Set the clock menu to AUTO, the auto clock function will automatically set the clock again.
Additionally, TIMER RESET will reset the
Recap screen
ÂProgram to record
CH | DAY | ON | OFF |
¤ 2 | MO11 | 11:30am | 1:30pm SP |
| º¹MENU to go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
VCR Rear Panel
TIMER |
RESET |
TIMER |
RESET |
31