Mitsubishi Electronics LT-46244, LT-52244 manual VCR to an Antenna or Wall Outlet Cable

243. TV Connections

VCR to an Antenna or Wall Outlet Cable

Required: Two-way RF splitter, two coaxial cables, right and left analog audio cables, either S-video or video cable.

1.Connect the incoming cable or antenna to IN on the RF splitter.

2.Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the VCR back panel.

3.Connect one coaxial cable from OUT on the RF splitter to ANT 1/MAIN on the TV back panel. This connection also allows you to use the TV Guide Daily feature.

4.To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable.

5.Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT VIDEO or S-VIDEOon the TV back panel. Connect only one type of video cable; S-Video is recommended, if available.

"/5
."*/

#"$,
*/165
1"/&-


CFMPX
MBCFM
XJUIJO
SFDFTTFE
BSFB

BU
UPQ

57
#BDL
1BOFM


065	065
	*/

57
#BDL
1BOFM


34





	
*/
	065 */	065 */
065	47*%&0	7*%&0
"/5&//"



065

- 3

*/

-.0/0 3

"6%*0

Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable