6. NetCommand | 59 |
Setting Up NetCommand Control of an A/V Receiver, continued
•To erase the IR code just “learned,” press CANCEL while the name is highlighted.
5.Press 
to highlight the name Input1. You can enter a custom name using the letters/numbers on the remote control. It is best to assign names to “learned” inputs that match the input names dis- played on the A/V receiver. For this example, enter the custom name TV using these guidelines:
•To select a character, repeatedly press a number key on the remote control to cycle through the characters associated with the key.
Special characters are available with the 1 key (!, &, blank space) and 0 key
•Press ENTER to set the character and move the highlight to the next character.
•To delete a character, highlight the character and press CANCEL.
•To highlight the first character, repeatedly press
CANCEL.
6.Press 
to move the highlight to the Assign column.
7.Use 
to highlight AudioOut (TV audio output). The triangular marker is always next to the assigned sound source.
8.Press EXIT if finished or continue with setup for another TV source.
Completed NetCommand setup described for controlling A/V receiver switching to the A/V receiver’s audio input labelled “TV.”
Setup 2: Automatic A/V Receiver Switching for a Surround Sound Device
Use this setup to send digital surround sound directly from a device to an A/V receiver.
1.Under Learn/Name, navigate to highlight the area next to Input2.
In this example, the IR code for the A/V receiver’s DVD Audio input will be “learned” as Input 2.
2.Press ENTER on the TV’s remote control.
IMPORTANT
All audio from what you are watching on the TV is always available as a stereo or mono output on both the TV’s AVR AUDIO OUTPUT and DIGITAL AUDIO OUT jacks.
To use the digital surround sound capabilities of your A/V receiver however, you must connect your DVD player, satellite receiver, or cable box directly to the A/V receiver, as surround sound may not be available from the TV’s audio output.
%7%1MBZFS | EJHJUBMTVSSPVOETPVOE |
| %7%BVEJP | ||
| |||||
XJUI |
|
|
|
| JOQVU |
|
|
|
|
| |
%JHJUBM |
|
|
|
| "73FDFJWFS |
4VSSPVOE | WJEFP | 57 |
|
| |
|
|
| |||
4PVOE |
|
|
|
| |
Setup 2: A/V receiver audio from a device providing surround sound directly to the A/V receiver
Completed NetCommand setup described for controlling A/V receiver switching to an A/V receiver input labelled “DVD.”
3.While the text Input2 is flashing, press and hold the DVD INPUT key on the A/V receiver’s remote control.
4.When a check appears next to Input 2, release the DVD INPUT key.
•If the text stops flashing before the check mark appears, repeat this step.
•To erase the IR code just “learned,” press CANCEL while the name is highlighted.
5.Press
to highlight the name Input2. Assign a custom name that matches the input name dis- played on the A/V receiver. For this example, enter the custom name DVD using the number keys and the guidelines given earlier.
6.Press
to move the highlight to the second Assign column.
7.Use
to highlight DVD in the list of devices recognized by the TV. The triangular marker always indicates the assigned sound source.
8.Press EXIT if finished or continue for additional TV sources.