425. TV Menu Settings
Setup Menu
Use the Setup menu to:
• Select English or Spanish for menus and
•Scan the channels available from the antenna or
cable service connected to the ANT 1 or ANT 2 jacks.
• Edit channel options, including channel locking.
•Set the TV’s internal clock.
•Set the TV Timer to turn on the TV automatically at a designated time.
• Set the energy mode for power consumption when | Setup menu, Scan option | |||
the TV is powered off. |
|
|
| |
|
|
|
| |
Setup Menu Options |
|
|
| |
|
|
| ||
| English | Display | ||
| Spanish | Note: To listen to audio in other languages (when available), see the section | ||
|
| |||
Language |
| on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog | ||
| signal) or Language (digital signal). | |||
|
| |||
|
|
| ||
| Scan memorizes broadcast channels to make them easier to find. To start | |||
Scan | channel memorization: |
| ||
1. | Highlight one of the input selections based on your connection to ANT 1 | |||
| ||||
|
| or ANT 2: |
| |
|
|
|
| |
|
|
| • Air when connected to an indoor or outdoor antenna. | |
|
|
| • Cable when connected to direct cable (no cable box) | |
|
| 2. | Press to highlight START. | |
|
| 3. Press ENTER to start channel memorization for the selected input. | ||
Notes on Scan and channel memorization:
•Channel memorization may take up to 15 minutes to complete.
•To stop channel memorization before completion, press CANCEL.
•When watching TV, press CH
to move through memorized channels.
•If you restart memorization, previously memorized channels for the selected input will be erased.
•If using TV Guide Daily, the channels displayed and their order are independent of the TV’s channel memorization. Refer to Appendix C for more information.
•If using a CableCARD, the complete list of avail- able channels is provided through the CableCARD. There is no need to perform channel memorization for ANT 1 CableCARD service unless you wish to clear channels from memory and reacquire the channel list from the service provider.
•To add a digital channel that does not appear in the Edit menu without repeating channel memorization:
1.Look up the physical channel number for the new digital channel. The website www.antennaweb.org can help you find the physical channel number.
2.Tune to any channel on the Ant 1 or Ant 2 input your antenna is connected to.
3.Use the number keys and — to enter the
CANCEL
physical channel number followed by
3 6 — 1 ENTER.
CANCEL
The TV will search for a digital channel on the channel
36 frequency. When it finds the channel, it will:
a.Add the channel to memory.
b.Change the channel number to the virtual channel number sent by the broadcaster.
c.Add any associated