6 NetCommand
51 |
About NetCommand
•The IR “Learning” feature of NetCommand allows the TV to determine the IR control signals for your A/V devices.
•NetCommand setup is optional.
•You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.
•NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels, or perform other functions. All this is accomplished with the TV’s remote control and the slide switch left in the TV position.
•You can choose the level of NetCommand control for your home theater.
Standard Setup. Perform a standard setup if you want NetCommand to control A/V devices, such as the TV, a playback device (like a DVD player), and a cable box. With this setup, you can use the TV’s remote control to operate these devices.
A/V Receiver Setup. Perform A/V receiver setup if you want NetCommand to:
Control a surround sound A/V receiver.
Automatically change audio input selections on an A/V receiver when you change inputs on the TV.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices. See the explanation on the following page.