242. TV Connections
Inputs and Outputs, continued
12.AVR/SURROUND OUTPUT
•Sends analog audio of the current program to an analog A/V surround sound receiver or stereo system. Digital audio from digital channels and HDMI devices is converted to analog audio by the TV for output on this jack. This is the only audio connection needed to the TV if using an analog A/V receiver or stereo system.
Note: If connecting headphones, set Sound > Global > Analog Audio Out to Variable.
•For a fuller surround sound effect, connect exter- nal rear speakers to this output to supplement the TV’s speaker array. Set Sound > Global > Analog Audio Out to Rear.
13.SUBWOOFER OUTPUT
Connect a powered subwoofer to this input to comple- ment effects from the TV’s speaker array. Set Sound > Global > Subwoofer to On to enable this output.
14. CENTER CH INPUT
Connect your A/V receiver’s center channel output to this input to make the TV speakers output
Auto Input Sensing
The TV’s Auto Input Sensing feature automatically recog- nizes some connections and prompts you to identify the device type. See page 15.
HDMI Device
Commonly used with an HDTV Cable Box, Satellite Receiver, or
Required:
Connect an HDMI cable from the TV to the device’s HDMI output.
Mitsubishi recommends using
Note: The HDMI connection supports copy protection (HDCP).
cable |
Any HDMI device | TV |
|
IMPORTANT
HDMI and Digital Surround Sound
Use an HDMI connection if you want to hear digital surround sound from the TV’s internal speaker array. The TV’s HDMI inputs can receive digital surround sound from an HDMI device.
For assistance call 1(800)