504. TV Menus
Sound, continued
Sound Mode | Stereo | No special audio effects from the TV speakers | |
|
|
| |
| Surround | Modifies audio from the TV speakers. | |
|
| • For monaural | |
|
| • For stereo programs, creates a simulated surround sound effect. | |
|
| • The TV’s speaker array plays surround sound if available. | |
|
|
| |
| Music | Optimizes the TV’s speaker array for music listening. | |
|
|
| |
| Night | Focuses the TV’s speaker array to a single point to limit sound heard by others | |
|
| outside the room. Press ENTER to adjust the focal point (Night Angle). | |
|
|
| |
Level Sound | On, Off | Reduces differences in sound volume between programming segments, such as the | |
|
| difference between regular broadcast programs and commercial segments. | |
Listen To | Stereo | The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word | |
(applies only |
| Stereo is displayed when you tune to a channel broadcasting in stereo. | |
to analog |
|
| |
Mono | Reduces background noise. Use when receiving a weak stereo audio signal. All | ||
channels from | |||
| audio is played as mono. | ||
the ANT input) |
| ||
|
| ||
SAP | Selects an additional monaural sound track not audible during normal TV viewing. | ||
| |||
| (Second Audio | The SAP signal might be related to the program (such as a sound track in a foreign | |
| Program) | language), or it might be unrelated (such as a weather report). If an SAP signal is | |
|
| broadcast, the letters SAP are displayed when you tune to the channel. |
Sound Global
Settings in this menu apply to all inputs.
Analog Audio Out
These settings affect audio from the AVR/SURROUND OUTPUT jacks.
Fixed | Use with an analog A/V receiver. Control volume from the A/V receiver. The |
| volume of the audio output signal is fixed and is unaffected by the TV’s volume |
| control. |
|
|
Variable | Use with headphones. Adjust headphone volume using the TV’s volume controls. |
| When set to Variable, the audio output signal is adjustable from the TV’s volume |
| controls. |
|
|
Rear | Sends left and right rear audio to external speakers. Use when supplementing the |
| TV’s speaker array with external rear speakers. See “External Rear Speakers,” page 41. |
Subwoofer | Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected. |
|
|
Center Channel | On allows the TV’s speakers to complement your external sound system as a center channel. Set |
| to Off if not in use. |
|
|
Sound | Auto SP |
| 265 Series. Performs auto calibration of the Sound Projector speaker array. See “Auto |
| Setup,” page 40. |
Sound SoundPro
Lets you set up the Sound Projector speaker array manually. See page 38.
For assistance call 1(800)