ANT Antenna, Video Composite Video | Mitsubishi Electronics 154

2. TV Connections

Inputs and Outputs, continued

1. ANT (Antenna)

Connect your main antenna or direct cable service (without a cable box) to ANT. The ANT input can receive digital and analog over-the-air channels from

aVHF/UHF antenna or non-scrambled digital/analog cable source.

2.HDMI® Inputs (High-Definition Multimedia Interface)

The HDMI inputs support uncompressed standard and high-definition digital video formats, bitstream Dolby Digital 5.1, and PCM digital stereo audio.

Mitsubishi recommends you use high-speed HDMI cables to connect newer source devices incorporating HDMI technology. High-speed cables bring you the full benefits of Deep Color and x.v.Color.

These HDMI inputs can also accept digital DVI video signals. To connect a device’s DVI output to the TV’s HDMI input, use an HDMI-to-DVI adapter or cable plus an analog audio. Connect the audio cable to the DVI/PC AUDIO INPUT jack on the TV to receive audio from your DVI device.

Use the HDMI inputs to connect to CEA-861 HDMI com- pliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats.

The TV’s HDMI inputs are compatible with many DVI-D and HDMI computer video signals.

These inputs are HDCP (High-Bandwidth Digital Copy Protection) compliant.

HDMI Cable Categories

HDMI cables are available as Standard and High-Speed types.

•High-Speed HDMI Cables. Newer DVD players, video games, and set-top boxes require High-Speed HDMI cables, suitable for clock frequencies up to 340 MHz or data rates of up to 10.2 gigabits per second. Use high-speed cables for 1080p HD signals carrying extended color encodings (i.e., 30 or more bits, also called Deep Color). High-Speed HDMI cables are also suitable for standard HDTV signals.

•Standard HDMI Cables. Standard HDMI cables may be unmarked. They are suitable for standard HDTV 720p, 1080i, and 1080p signals with 8-bit color depth. Use Standard HDMI cables for clock frequencies up to 74.25 MHz or data rates of up to 2.23 gigabits per second.

3. Y/Video (Composite Video)

Use the adjacent AUDIO R and L inputs if you wish to send audio to the TV.

4. Y/VIDEO Pb Pr (Component Video)

Use the adjacent AUDIO R and L jacks if you wish to send audio to the TV.

5. AUDIO

Analog stereo inputs for use in conjunction with adja- cent composite or component video jacks.

6. NetC Out/IR IN

265 Series

As an output: Connect IR emitters to this jack to send NetCommand control signals to external IR-controlled devices.

As an input: Accepts control signals from an external controller when set up by your professional installer.

7. LAN

Use the LAN Ethernet jack for streaming internet video to the TV. See page 42 for setup. Visit www.VUDU.com for details about VUDU™ service.

8. USB

The TV can read JPEG photo files and mp3 music files from a USB storage device connected to this input.

154 Series. Connect a compatible wireless adapter to stream internet content to the TV (page 42).

9. USB (Power Only)

Standard USB 5-volt, 500-milliamp power output you can use to supply power to an accessory device, such as a wireless subwoofer (page 28).

10. DVI/PC INPUT AUDIO

Connect a DVI device to one of the TV’s HDMI inputs and use this jack to send analog audio to the TV.

11. DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming analog audio is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver.

For assistance call 1(800) 332-2119