6 | NetCommand IR Control of an A/V |
Receiver |
67 |
NetCommand IR
Two levels of NetCommand A/V receiver control are available through the Inputs > AVR menu.
•Power and volume. See the next page.
•Automatic audio and video switching over HDMI. See “Setup to Control Automatic Audio and Video Switching via HDMI,” page 70.
Note: To set up control of other device types, see “Initial NetCommand Setup,” page 62.
Controlling an A/V Receiver after NetCommand Setup
Switching Audio to and from the A/V Receiver
1.Press AUDIO.
2.Press 
to show the TV Speakers option.
3.Press 
to select either On (sound through TV speakers) or Off (sound through A/V receiver).
Controlling A/V Receiver Power
With Any Connection Type
1.Press AUDIO.
2.Press 
to show the TV Speakers option.
3.Press 
to select Off.
4.Point the remote control at the TV (not the A/V receiver) and press POWER to power the A/V receiver on or off.
With an HDMI Connection
1.Press INPUT.
2.Highlight the A/V receiver icon.
3.Press POWER.
Controlling Other A/V Receiver Functions
•With the A/V receiver powered on and selected, the TV’s remote control operates the volume and mute functions.
•If you have performed setup to control A/V receiver switching over HDMI, when you switch to a device in the Input Selection menu, the A/V receiver will automatically switch to the correct audio input for the device.
Note: Connect the HDMI cable between the TV and A/V receiver first before performing NetCommand setup for the A/V receiver. If you perform NetCommand setup and then later con- nect the cable, the NetCommand setup will be lost.
For assistance call 1(800)