English
Switching to a Program Type of Your Choice Temporarily
By receiving EON data sent by FM RDS stations, the EON function allows the unit to switch temporarily to a broadcast program of your choice (TA, NEWS, and INFO) from a different station.
The EON function only works when you are listening to a preset FM RDS stations providing EON data.
•The EON indicator lights while receiving a station with EON data.
To activate the EON function
REMEMBER you must preset FM RDS stations to use the EON function. If not yet done, see page 13.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 | Press PTY/EON until “EON” and | PTY/EON |
|
“SELECT” alternately appear on the display.
•Each time you press the button, RDS operation mode changes as follows:
|
|
| PTY SELECT |
| EON SELECT |
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
2 |
|
|
| Canceled |
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
Press SELECT |
|
| SELECT | ||||||||
|
| ||||||||||
|
|
|
| ||||||||
data type you want appears on the display.
The selected EON data type indicator also flashes.
EON
TA
•Each time you press the button, the EON data types change as follows:
TA 
NEWS
INFO 
OFF 
(Canceled)
TA: Traffic announcement
NEWS: News
INFO: Program the purpose of which is to impart advice in the widest sense.
OFF: The EON function is canceled. The EON data type indicator (TA, NEWS, INFO) goes off.
3 | PTY/EON |
Press PTY/EON once again. |
The EON data type indicator stops flashing and remains lit.
Now, the EON function is activated. See “How the EON function actually works”.
How the EON function actually works:
CASE 1
If there is no station broadcasting the program you have selected
The unit continues tuning in the current station.
Ç
When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing.
Ç
When the program is over, “EON END” appears in the main display, and the unit goes back to the previously tuned station, but the EON function still remains activated.
CASE 2
If there is a station broadcasting the program you have selected
The unit tunes in the program. The indicator of received PTY code starts flashing.
Ç
When the program is over, “EON END” appears in the main display, and the unit goes back to the previously tuned station, but the EON function still remains activated.
CASE 3
If the FM station you are listening to is broadcasting the program you have selected
The unit continues to receive the station but the indicator of received PTY code starts flashing.
Ç
When the program is over, the indicator of received PTY code stops flashing and remains lit, but the EON function still remains activated.
More about the EON function
•EON data sent from some stations may not be compatible with this unit. In this case, the EON function may not work correctly.
•While listening to a program tuned in by the EON function, the station does not change even if another network station starts broadcasting a program of the same EON data.
•The EON function is canceled when you change the source to CD, TAPE, or AUX, while it is temporarily canceled when you change the source to AM.
– 15 –