Marking Positions To Play Back Again Later

When 3 scene angles are contained.

BASIC OPERATIONS ON DVD DECK EN 25

DVD

		DVD
	0-9
		MARK
	ENTER	Selection Keys
		Selection Keys
		FGDE
	MENU	RETURN
	S/PREVIOUS	T/NEXT
	I
	o
	DISPLAY	ON SCREEN
	REC MODE/REMAIN	ON SCREEN
	REC MODE/REMAIN
	AUDIO	SET UP
		SUBTITLE

Marking Positions To Play Back Again Later

It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/R/RW (VR mode only) discs when recording is helpful to locate a start point when you play back the discs later.

To mark positions:

During playback, press MARK at positions you want to mark.

●AMARKB appears on the TV screen. You can easily locate the marked positions using S or T when you play back the disc.

To delete the marked positions:

While paused, press S or T to locate a marked position you want to delete, then press MARK.

●Crossed AMARKB appears on the TV screen, and the marked position is deleted.

NOTES:

●For DVD-R/RW (Video mode) discs, marks are assigned automatically every 5 minutes.

●If MARK is pressed when playing back a disc that does not allow marks to be inserted, A7B appears on the TV screen.

Checking The Time Information

You can check time information of a disc on the front display panel and the TV screen.

8DVD-RAM/DVD-R/DVD-RW

Each press of DISPLAY on the remote control or the unit changes the display as follows:

During recording

Clock time (front display panel only) N Current title elapsed time N Disc remaining time N (back to the beginning)

During playback

Each title elapsed time N Total remaining time N Remaining time* N (back to the beginning)

* only discs before finalizing

During recording/playback or in stop mode

Press REC MODE.

●The disc remaining time according to recording modes appears on the TV screen.

●It is possible to check disc remaining time according to recording modes also by pressing REMAIN.

●In FR mode, it is possible to set recording time in detail. While the recording mode and the disc remaining time are displayed by pressing REMAIN, press selection keys to select AFRB, then press DE to select the desired recording time. (A pg. 51)

●It is not possible to switch the recording mode during playback or while recording.

8Video CD/SVCD/Audio CD During playback or in stop mode

Current track elapsed time N Current track remaining time N Total elapsed time N Total remaining time N (back to the beginning)

NOTES:

●When a PBC-compatible Video CD/SVCD disc is loaded, deactivate the PBC function. (A pg. 26)

●For pre-recorded DVD VIDEO, only the title, chapter and elapsed time are displayed when ON SCREEN is pressed.

Angle Selection

You can enjoy a variety of scene angles if a DVD VIDEO disc contains Amulti-angleBparts, where the same scene was shot from different angles.

If the disc contains Amulti-angleBparts, AyB appears on the TV screen at the beginning of the Amulti-angleBpart.

1Press ANGLE during playback.

The angle selection display appears on the TV screen.

2 Press ANGLE or selection keys to select your desired angle.

●Each time you press ANGLE or the selection keys, the angle changes.

●When A7B appears on the TV screen, the current scene is not recorded from multiple angles. In addition, some discs prohibit angle selection.

●To clear the angle selection display, press ENTER. In addition, the angle selection display disappears automatically if no operation is done for 10 seconds.