JVC SR-DVM700U Dubbing From DV To HDD, Dubbing An Entire Cassette, Dubbing From DV To DVD, Adv B

Page 48

48 EN EDITING

Dubbing From DV To HDD

 

7 Press G to select ACONFIRMB, then press ENTER. The

(Dubbing An Entire Cassette)

 

confirmation screen appears.

 

8 Press selection keys to select AEXECUTEB, then press

It is possible to perform automatic dubbing of all the recorded

 

ENTER for confirmation.

programs of a cassette from the DV deck to the HDD deck using

 

● If the DV deck is in the stop mode, the unit will start dubbing

the AENTIREB dubbing. You cannot select the images to be

 

from the current tape position.

dubbed; all recorded images on the DV cassette will be dubbed.

 

● If the DV deck is in the pause mode, the unit will start dubbing

1 Load the Mini DV cassette you want to dub. Make sure its erase

 

from the point where the tape was paused after automatically

 

rewinding the tape for 2 seconds.

protection switch is set to ASAVEB.

 

 

● To cancel the dubbing, press o then selection keys to select

● Set ADV AUDIO RECB to the appropriate mode. (A pg. 62)

 

 

ACANCELB and press ENTER to confirm.

2 Press DUBBING to access the Dubbing Menu screen.

 

 

9 Upon completing dubbing, the tape stops and ADUBBING

3 Press selection keys to select ADVNHDDB, then press

 

 

COMPLETEDB appears on the TV screen. Press ENTER to

ENTER.

 

end.

4 Select AENTIREB, then press ENTER.

 

● The tape will automatically be rewound.

A

 

NOTES:

5 Press selection keys to select SELECT RECORDING

 

● When there are blanks on the tape of more than 2 seconds, the

MODEB, then press ENTER. Press selection keys to select

 

the desired option, then press ENTER.

 

HDD deck will enter into pause mode while playback on DV deck

● To dub DV format contents in its original DV format, select

 

continues. This also applies to portions of the DV tape that are

ADVB.

 

damaged or unreadable. The last image is displayed on the TV

6 Press selection keys to select ASELECT SOUND MODEB,

 

screen. Dubbing will resume once recorded portion is detected. If

 

the blank portion continues until the end of the tape, ADUBBING

then press ENTER. Press selection keys to select the desired

 

 

COMPLETEDB appears on the TV screen when the tape end is

option, then press ENTER.

 

 

reached and the tape rewinds automatically.

7 Press G to select ACONFIRMB, then press ENTER. The

 

 

● Dubbing copyright guarded tape is not possible.

confirmation screen appears.

 

● When dubbing is in progress, o, ON SCREEN and AUDIO

8 Press selection keys to select AEXECUTEB, then press

 

buttons are functional.

ENTER for confirmation.

 

Dubbing From DV To DVD

● Once dubbing starts, it will continue dubbing until the end of the

 

tape is reached.

 

(Dubbing An Entire Cassette)

● To cancel the dubbing, press o then selection keys to select

 

 

 

ACANCELB and press ENTER to confirm.

 

It is possible to perform automatic dubbing of all the recorded

● If the tape is not rewind, the unit will start dubbing after

 

programs of a cassette from the DV deck to the DVD deck using

automatically rewinding the tape to the beginning.

 

the AENTIREB dubbing. You cannot select the images to be

9 Upon completing dubbing, the tape stops and ADUBBING

 

dubbed; all recorded images on the DV cassette will be dubbed.

COMPLETEDB appears on the TV screen. Press ENTER to

 

1 Load the Mini DV cassette you want to dub. Make sure its erase

end.

 

protection switch is set to ASAVEB.

● The tape will automatically be rewound.

 

● Set ADV AUDIO RECB to the appropriate mode. (A pg. 62)

NOTES:

 

2 Press DUBBING to access the Dubbing Menu screen.

● When there are blanks on the tape of more than 2 seconds, the

 

3 Press selection keys to select ADVNDVDB, then press

HDD deck will enter into pause mode while playback on DV deck

 

 

ENTER.

continues. This also applies to portions of the DV tape that are

 

 

4 Select AENTIREB, then press ENTER.

damaged or unreadable. The last image is displayed on the TV

 

screen. Dubbing will resume once recorded portion is detected. If

 

5 Press selection keys to select ASELECT RECORDING

the blank portion continues until the end of the tape, ADUBBING

 

MODEB, then press ENTER. Press selection keys to select

COMPLETEDB appears on the TV screen when the tape end is

 

the desired option, then press ENTER.

reached and the tape rewinds automatically.

 

6 Press selection keys to select ASELECT SOUND MODEB,

● Dubbing copyright guarded tape is not possible.

 

 

then press ENTER. Press selection keys to select the desired

● When dubbing is in progress, o, ON SCREEN and AUDIO

 

 

option, then press ENTER.

buttons are functional.

 

 

7 Press G to select ACONFIRMB, then press ENTER. The

Dubbing From DV To HDD

 

 

confirmation screen appears.

(Dubbing A Part of A Cassette)

 

8 Press selection keys to select AEXECUTEB or AAUTO

 

FINALIZEB, then press ENTER for confirmation.

 

 

It is possible to select the images on the DV cassette to be dubbed

 

● Once dubbing starts, it will continue dubbing until the end of the

from the DV deck to the HDD deck using AMANUALB dubbing.

 

tape is reached.

1 Load the Mini DV cassette you want to dub. Make sure its erase

 

● To cancel the dubbing, press o then selection keys to select

 

ACANCELB and press ENTER to confirm.

protection switch is set to ASAVEB.

 

 

● If the tape is not rewind, the unit will start dubbing after

● Set ADV AUDIO RECB to the appropriate mode. (A pg. 62)

 

 

automatically rewinding the tape to the beginning.

2 Press DUBBING to access the Dubbing Menu screen.

 

 

9 Upon completing dubbing, the tape stops and ADUBBING

3 Press selection keys to select ADVNHDDB, then press

 

 

COMPLETEDB appears on the TV screen. Press ENTER to

ENTER.

 

end.

4 Select AMANUALB, then press ENTER.

 

● The tape will automatically be rewound.

A

 

NOTES:

5 Press selection keys to select SELECT RECORDING

 

● The program information at the DV deck will not be dubbed.

MODEB, then press ENTER. Press selection keys to select

 

the desired option, then press ENTER.

 

● When there are blanks on the tape of more than 2 seconds, the

● To dub DV format contents in its original DV format, select

 

DVD deck will enter into pause mode while playback on DV deck

ADVB.

 

continues. This also applies to portions of the DV tape that are

6 Press selection keys to select ASELECT SOUND MODEB,

 

damaged or unreadable. The last image is displayed on the TV

 

screen. Dubbing will resume once recorded portion is detected. If

then press ENTER. Press selection keys to select the desired

 

 

the blank portion continues until the end of the tape, ADUBBING

option, then press ENTER.

 

 

 

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SR-DVM700U For Customer UseDear Customer Declaration of ConformitySR-DVM700U JVCPower Lines Power SourcesPower Cord Protection Outdoor Antenna GroundingAccessories CleaningDamage Requiring Service Replacement PartsDo not place the unit Do not block the unit’s ventilation openings or holesContents About Discs DVD-R/RW DiscsBefore finalizing After finalizingDiscs For Playback Only Unplayable DiscsRegion Number Recording Medium And Format File Structure Of DiscsDVD-RAM DVD Video Marks Life Span Of Parts Care And Handling Of DiscsFront View C D E F G H I K L MAC Power Cord a pg Cooling Fan Serial Command Connector D-SUB 9-PIN Serial COM. a pgVIDEO/VIDEO/AUDIO Output Connectors HDD & DVD deck only Rear ViewFront Display Panel Remote Control How To UseTV Muting Button TV d a pg DV Button* a pg HDD Button* a pgWhen pressing REC Mode When playing back a recorded titleWhen using Live Memory playback When recordingWhen capturing images from the external DV equipment On-Screen Display DV DubbingOn-Screen Display DV deck Connected DV equipment informationConnecting to a TV Monitor Connecting to a DV DeviceConnecting to Another Recorder Basic ConnectionsClock Set Press selection keys to setEnter Daylight Saving TimeLanguage On-screen Language SetMenu/Audio/Subtitle Language Set DVD deck only Monitor Set Amonitor TYPEB, thenPan&Scan/Letter Box Pan&ScanBasic Playback Playback Features Variable Speed SearchStill Picture/Frame-By-Frame Playback Slow MotionSkip Search Resume Function Instant ReplayJump Search Marking Positions To Play Back Again Later Checking The Time InformationAngle Selection DVD-RAM/DVD-R/DVD-RWSubtitle Selection Audio Language/Sound Selection Audio Channel SelectionPlayback Control PBC Function Track USEHow To Access The On-screen Bar Contents of the on-screen bar during playbackBasic Operation On The On-screen Bar Repeat PlaybackLocating The Beginning Of a Desired Selection DVD-RAM/RW/RJPEG/MP3 Adjusting The Picture Quality Simulated Surround EffectTime Search Setting The Progressive Mode Random PlaybackProgram Playback Basic Playback Playback Features Skip Search5x Speed Playback Marking Positions To Play Back Again LaterUsable cassettes Accidental erasure preventionNext Function Memory Soundtrack SelectionTime Code For Automatic Start Of PlaybackLive Memory Playback Recording/playback Status DisplayAvailable only when paused Navigation EE CheckBackward Jump Forward JumpRetroActive Recording HDD deck only Resuming Playback HDD deck onlyAbout limitation on temporary recording HDDLibrary Database Navigation About registration of informationKeys Limitations of registration Icons and their meaningsEdit Original Information Scan For Beginning Of TitleModify Index Title NameModify Category Protect TitleDelete Title To modify the pointsModify Chapter HDD, DVD-RAM & DVD-R/RW VR mode only Divide Title HDD deck onlySelection keys to select Edit Play List Information Create Play ListEdit Scenes Play ListAdd scenes Move ScenesDelete Scenes Play Back Play ListNavigate Library Information Scan For Title From LibraryRegister Disc Locating The Desired Folders And Tracks Press NavigationDubbing High Speed Dubbing From HDD To DVDJust Dubbing From HDD To DVD Manual Dubbing From HDD To DVDDubbing From DVD To DV Dubbing From HDD To DVOriginal Dubbing From DVD To HDD Arec BDubbing From DV To HDD Dubbing An Entire CassetteDubbing From DV To DVD Dubbing a Part of a CassetteCompletedb appears on the TV screen when the tape end is When performing the Just DubbingWhen performing the Manual Dubbing About Disc Remaining DisplayRemote control switch Sound monitor switchAuto capture button When you dub from DV equipment other than a camcorder Recording ModeFree Rate Function To skip unwanted part of the source pictureIf the camcorder has no S-VIDEO output connector If the camcorder has an S-VIDEO output connectorIf the camcorder has a DV IN/OUT connector Edit From a CamcorderWhen using your unit as the source player When using your unit as the recording deckDubbing DV Format Contents To a DV Device HDD Deck Only Digital Audio Dubbing Example Dubbing to an MDAudio Dubbing DV Deck Only ArecbInput Select on the unit to select AF-1B Audio OutputIf the player has no S-VIDEO output connector If the player has an S-VIDEO output connectorInsert Editing DV Deck Only Remote Control Functions Remote Control 1/2/3/4 Code SwitchingTV Multi-Brand Remote Control Brand Name CodeWhen you can’t switch the audio channel of a bilingual ProgramMode Set Original recorded sound Post-recorded soundOriginal recorded sound and post-recorded sound To record in Dolby Digital formatTo display the ADV SET UPB menu, press SET UP while DV deck modeEnables Audio Dubbing later You can select the desired sound mode when playing back anFormat a Disc DVD Deck Only Format a DVD-RAM DiscFormat a DVD-RW Disc Format a DVD-R DiscAfter finalizing For DVD-R/RW Video mode discs Finalize a Disc DVD Deck OnlyCancel The Finalization Of a DVD-RW Disc To cancel finalizationTo finalize a disc Text Color Updating Backgrounds And Text ColorUsable image format, text format and disc Background and text colorRegistering Default Background And Text Color Previewing the background effectMode Lock Tray Lock DVD Deck OnlyLast Function Memory To lock trayInitializing DVD Deck Only GeneralPlayback HDD Deck Playback DV DeckRecording HDD Deck Recording DV DeckFor basic connection For component video connectionDamaged. Take out the disc, clean it and retry. a pg Operation has been attempted when a disc is not loaded, orFormatting is not complete since the disc may be dirty or Recording and/or editing cannot be performedLanguage Code List RS-232C Interface Command Table RS-232C Interface Specifications9PIN D-Sub PIN NoRS-232C Interface Command Operation CommandsCommand Description REW Clock Preset OnesPower ON/OFF TEN KEY REC REC Mode SP/LP/EP… REC Pause DVD Deck ReturnDV/HDD/DVD Dubbing JOG-1 Cancel SET UPB8 Input/Output Selection 1st Byte 2nd Byte VideoExternal input selection See ALanguage Code ListB a pg B8 Audio Language Selection 1st Byte 2nd ByteB8 Subtitle Selection 1st Byte 2nd Byte System Commands Response CommandsSubtitle selection Date SenseTime Sense D7 Status Sense HDD DVD HDD/DVDVTR PauseDD JVC Pause TypePause Disc Type DVD DVD-RAM DVD-RW DVD+R DVD+RW VCDPower requirement Video recording compression system Power consumption Audio recording systemLaser specification Recording time TemperatureSimultaneous Recording and Playback Still Picture/Frame-By-Frame PlaybackMemo EN SR-DVM700U

SR-DVM700U specifications

The JVC SR-DVM700U is a versatile and high-performance digital video recorder that caters to both professional and consumer needs. It is designed to handle a variety of video formats, making it a convenient and reliable choice for video production, archiving, and playback tasks.

One of the standout features of the SR-DVM700U is its ability to support both digital and analog formats. It can play and record from MiniDV, DVCAM, and DVCPRO tapes, while also offering the capability to handle various VHS formats. This dual functionality provides users with an excellent solution for converting older tapes to digital formats while maintaining high-quality output.

In terms of connectivity, the SR-DVM700U is equipped with a range of inputs and outputs. It features FireWire (IEEE 1394) connectivity, enabling fast and efficient transfer of digital video to and from computers and other devices. Additionally, it has multiple composite video and audio connections, making it easy to interface with various equipment in the production setup. The S-Video and component outputs enhance the video quality, ensuring professional-grade performance.

The device leverages advanced digital processing technologies to ensure high-quality audio and video recordings. It includes a built-in up-converter that improves the resolution and sharpness of analog signals when converting to digital formats, enhancing the overall viewing experience.

The JVC SR-DVM700U also incorporates features like playback time code and edit search functions, which are essential for video editing workflows. This technology allows users to efficiently navigate through their footage, making it easier to locate specific scenes or segments during the editing process.

Moreover, the unit is designed with a user-friendly interface, featuring a clear LCD screen and easy-to-use controls, which facilitate seamless operation. The compact and robust design ensures durability, making it suitable for both studio environments and on-location shoots.

In summary, the JVC SR-DVM700U digital video recorder is a powerful tool that combines multiple recording formats, advanced processing technologies, and versatile connectivity options. Its ability to bridge the gap between analog and digital media, coupled with its professional features, makes it an invaluable asset for videographers and multimedia professionals looking to preserve and transform their video content.
Top Page Image Contents