JVC SR-DVM700U manual Remote control switch, Auto capture button, Sound monitor switch

50 EN EDITING

	DV Dubbing (HDD & DVD Deck Only)	1	Connect a camcorder or DV equipment to the [DV IN/OUT]
		2	connector on the unit’s front panel.
			Press DV/HDD/DVD on the unit repeatedly; or press HDD or
You can dub programs from a camcorder or DV equipment
			DVD on the remote control to select the recording deck.
connected to the unit with a DV cable. The unit’s remote control
		● When dubbing to a DVD disc, load a recordable disc on this
allows you the limited control of the connected camcorder or DV
			unit.
equipment functions during dubbing.		3
			Press INPUT SELECT +/– on the remote control or
NOTE:		4	INPUT SELECT on the unit to set the channel to ADVB.
			Press ON SCREEN.
When connecting the unit to a device equipped with a DV input
connector, be sure to use the optional DV cable (VC-VDV 204U).		● The on-screen display for DV dubbing appears.
		5 Press selection keys to select		, then press ENTER
	Your unit		to display the remote icon (facing to the right) for the DV
			equipment.

To [DV IN/OUT]

6 Press REC MODE repeatedly to set the recording mode. For

DV deck, press REC MODE on the remote control to set the

recording mode.

● Each time you press REC MODE, the recording mode changes

as follows:

DV*1 N XP N SP N LP NEP N FR (60-360*2, 420, 480) N

(Back to the beginning)

*1 Selectable when dubbing to the HDD deck.

*2 The value is selectable from 1 to 6 hours in 5 minutes interval by

pressing DE repeatedly after selecting AFR60–FR360B. To change

the value in 30 minutes interval, press and hold DE.

Camcorder

DV equipment

DV cable (VC-VDV 204U)

(not supplied)

DV connector

● For details on the recording mode, see ARecording ModeB

(A pg. 51).

7Locate the point from where you want to start dubbing, then stop or pause playback by pressing the following buttons on the remote control: I, N, O, o, W.

●To play back in slow speed (1/10 of the normal speed), press W to pause playback, then press O or N.

●To play back frame-by-frame, press W to pause playback, then press W repeatedly. Each press of W advances a frame.

●To change the playback direction, press O or N.

8Press selection keys to select , then press ENTER repeatedly until the desired sound track appears on the TV screen.

SOUND1:

Select this to record the original stereo sound played back on the connected DV equipment.

The following on-screen display for DV dubbing appears when ON SCREEN is pressed while the channel has been set to ADVB.

	HDD	0:00	1:00		2:00		DV
						GR-DV3500
FR360	00 : 00 : 00. 00				00 : 00 : 00. 00		L – R
12bit	DV	JVC		GR-DV3500			SOUND1

D V D V 1 2

A B C

ARemote control switch

To switch between the devices operable by the remote control

unit. The unit is operable when the remote icon ( ) displayed faces to the left, while the DV device is operable when the remote icon is facing to the right.

BAuto capture button

Select to start or pause the dubbing. If ENTER is pressed when the DV device is in the pause condition, preroll editing* where it is possible to dub with a start time that is highly accurate will be activated. When the DV device cannot be operated from the unit (such as in camera mode), proceed with normal recording.

●Do not start dubbing at the portion with no time code (A– –:– –:– –B).

* Preroll editing refers to the playback after the DV tape is slightly rewind. (For DV devices that do not support the –1x speed, the rewinding time may be longer.)

CSound monitor switch

For selecting the desired sound format for dubbing.

SOUND2:

Select this to record the dubbed stereo sound played back on the connected DV equipment.

MIX:

Select this to record the sound of both ASOUND1B and ASOUND2B.

●Note that this selection is not available when the source program is recorded in 16BIT (48 kHz) mode.

9Press selection keys to select , then press ENTER. The dubbing starts.

●Playback on the external DV equipment and recording on the unit should start simultaneously.

●To pause dubbing, press selection keys to select , then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing W on the unit also works the same way.

10 Press selection keys to select , then press ENTER. Then press o. The DV equipment stops.

11 Press selection keys to select , then press

ENTER.

12 Press o twice on the remote control to stop dubbing.

●Both the unit and the external DV equipment stop dubbing.

NOTES:

●To create chapters (marks) automatically, set ADV AUTO CHAPTERINGB to AONB. (A pg. 61)

●Dubbing copyright guarded programs is not possible.

●Original DV information such as the recording date and time are not recorded.

●The superimposed indication during the operation or dubbing is not recorded.