JVC LT-26C31SJE, LT-26C31BUE, LT-26C31SUE Zoom function, 3D Sound function, „ Choose the Zoom mode

Page 14

Remote control buttons and functions

ZOOM function

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.

AUTO:

When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal.

If a WSS signal is not included, the picture is displayed in accordance with the ZOOM mode set with the 4:3 AUTO ASPECT function.

•For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 20.

•When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the c button and change to another ZOOM mode.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

PANORAMIC:

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

• The top and bottom of the picture are slightly cut off.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

FULL:

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

•For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape.

„Choose the ZOOM mode

1Press the cbutton to display the ZOOM menu

ZOOM

AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM

16:9 ZOOM SUBTITLE FULL

BACK

TV OK

D0009-EN

•The cbutton does not work in the twin pictures mode.

2Press the 6buttons to choose a ZOOM mode. Then press the abutton

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

•The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return to the previous ZOOM mode, choose the ZOOM mode again.

„Adjusting the visible area of the picture

If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually.

1Press the cbutton

The ZOOM menu appears.

2Press16:9ZOOMthe abutton to display the ZOOM mode indicator

TheD0010-ENindicator appears.

3While it is displayed, press the 6 buttons to change the position of the picture

•You cannot adjust the visible area in REGULAR or FULL mode.

3D SOUND function

You can enjoy sounds with a wider ambience.

Press the 3button to turn the 3D SOUND function on or off

•The 3D SOUND function does not work properly with mono sound.

•The 3D SOUND function can be also turned on or off by using the SOUND SETTING menu. For details, see “3D SOUND” on page 21.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents LT-26C31BUE LT-26C31SUE LT-26C31BJE LT-26C31SJE English Deutsch Français„ If in doubt consult a competent electrician How to replace the fuse„ Warning „ Guidelines for safe operationEnglish Distance recommendations „ Cleaning the screenPixel defects S.T. demonstrationContents Using the stand Setting up your TVInstallation Putting the batteries into the Remote control Remove the terminal coverWithout terminal covers Aerial Connecting the aerial and video cassette recorder VCRConnecting the power cord to the AC outlet Initial settings „ Pre-set download „ TV auto power on/VCR image viewLink functions „ Direct RecTV buttons and functions Press the #standby button to turn the TV on or off Remote control buttons and functionsTurn the TV on or off from standby mode PR List Watch images from external equipment„ Use the PR List Zoom function „ Choose the Zoom mode„ Adjusting the visible area of the picture 3D Sound functionDisplaying the current time Using the PIP functionUsing the Freeze function Return to TV channel instantly„ To use Dbutton Using the MULTI-PICTURE functionOperating a JVC brand VCR or DVD player VCRBasic operation Using the List ModeTeletext function HoldReveal CancelSub-page SizeUsing the TV’s menu Picture Adjustment Picture SettingPicture Mode Colour TempSuper DigiPure Picture FeaturesDigital VNR Auto Aspect Colour SystemMovie Theatre Colour ManagementStereo / I Sound SettingSpeaker BBETV Speaker VolumeHeadphone OutputID List EXT SettingS-VIDEO input DubbingEXT-1/EXT-3 Blue Back FeaturesSleep Timer Child LockIf you have forgotten the ID number Decoder EXT-2Press the Number buttons to enter the ID number Auto Program InstallLanguage Choose LANGUAGE, then press the abuttonInsert EDIT/MANUALMove DeletePress the red button to start the ID function To cancel the Insert function„ ID Press the abutton to give a channel name ID to a TV channelPress the green or red button to search for a TV channel To cancel the Manual functionWhen the Country setting is not United Kingdom Other TV channelsUsing the ACI function Downloading data to a VCR Additional menu operationsTo return to the Install menu from the Country menu Changing the Country settingUsing the Decoder EXT-2 function To cancel the Decoder EXT-2 functionAdditional preparation Connecting external equipmentBefore connecting anything Without terminal covers„ Connecting Speakers/Amplifier „ Connecting headphones„ Video or sound signal output from the EXT-2 terminal „ T-V Link compatible VCRCH/CC numbers ChannelTroubleshooting „ Other concerns Specifications Design and specifications subject to change without noticeVictor Company of JAPAN, Limited
Top Page Image Contents