EXT Setting, S-VIDEO input, ID List, Dubbing

EXT SETTING

Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu.

	EXT SETTING
	EXT-1
	EXT-3	DUBBING
		EXT-2
	TV
		EXT-4
	BACK	ID LIST
		ID LIST
TV	OK	S-IN
		S-IN
D0020-EN

S-IN (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and “Additional preparation” on page 33 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set S-IN (S-VIDEO input) to the EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear.

1Choose an EXT terminal

2Press the yellow button and set the S-IN (S- VIDEO input).

Then press the abutton

An S-IN (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the S-IN (S-VIDEO input) setting:

Press the yellow button and turn off S-IN (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.

•The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S- VIDEO input) in the EXT-1 terminal.

•Setting S-IN (S-VIDEO input) changes the head character from “E” to “S”. When an EXT terminal receives a normal video signal, “E2” or “E3” appears on the display. This changes to “S2” or “S3” when it receives an S-VIDEO signal.

•Even a device which can output an

S-VIDEO signal (Y/C signal) may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because the S-IN (S-VIDEO input) setting has been made, read the device instruction manual carefully again to check for the device settings.

ID LIST

You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name.

1Choose an EXT terminal

2Press the blue button to display the name list (ID LIST)

	EXT SETTING
	EXT-1		ID LIST
	EXT-3	DUBBING	VHS
	EXT-3	EXT-2	S-VHS
		EXT-2	S-VHS
			DVC
	TV		SAT
			STB
		EXT-4	GAME
		EXT-4	LD
			LD
			DVD
	BACK		8mm
	BACK		Hi-8
			Hi-8
TV	OK

D0021-EN

3Press the 6 buttons to choose a name. Then press the abutton

The ID LIST disappears and the name is assigned to the EXT terminal.

•You cannot assign an EXT terminal name not found in the name list (ID LIST).

To erase a name assigned to the EXT terminal:

Choose a blank space.

4 Press the abutton to complete the setting

DUBBING

You can choose a signal source to be output from the EXT- 2 terminal.

You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.

1Press the 5 buttons to choose the arrow from the menu

EXT SETTING