Using the MULTI-PICTURE function, Vcr, Dvd

Remote control buttons and functions

Cancelling the PIP function:

Press the Rbutton or bbutton.

•If the main-picture signal is poor, the quality of the sub-picture may also be poor.

•If the pictures have different standards, the top and bottom of one of them may be missing.

•If an external device is operated, the sub-picture may disappear. If this happens, press the Rbutton again to redisplay the sub-picture.

•You cannot view a scrambled channel in the sub- picture. If the g(swap) button is pressed when viewing a scrambled channel in the main-picture using an external decoder, the channel you have been viewing in the sub-picture will appear in both the main-picture and sub-picture.

•The ZOOM function does not work in the twin- picture mode.

•Do not press the g(swap) button while you are recording the TV output on the VCR. If you do, the TV output signal will change.

•The BLUE BACK function does not work in the twin picture mode or the picture-in-picture mode.

•PIP function does not work for a picture of 1125i signal. See “EXT-4 terminal” on page 38 for more information on this type of signal.

•A picture of 625p or 525p signal cannot be displayed as the sub-picture. See “EXT-4 terminal” on page 38 for more information on these types of signals.

Pay attention to the following.

-When the EXT-4 picture is a picture of 625p or 525p signal, you cannot choose EXT-4 with the p buttons.

-When the EXT-4 picture signal is changed to 625p, 525p or 1125i signal while the EXT-4 picture is displayed as the sub-picture, the PIP function is cancelled.

-The pictures cannot be swapped when a picture of 625p or 525p signal from EXT-4 is being displayed as the main picture.

•The sub-picture cannot be output from the TV.

Using the MULTI-PICTURE function

You can display multi-pictures so you can find a program you want to view.

1Press the Xbutton to display multi-pictures

The channels are displayed in the channel number order. The multi-pictures will appear in multi-picture mode.

12-pictures multi:

3Press the abutton

The multi-pictures disappear and the chosen picture appears.

Cancelling the multi-pictures:

Press the bbutton, the number buttons or the a button.

•Pictures from external devices cannot be displayed in the 12-pictures multi mode.

Operating a JVC brand VCR or DVD player

These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.

1Set the VCR/TV/DVD switch to the VCR or DVD position

VCR:

When you are using a VCR, set the switch to the VCR position. You can turn the VCR on or off with the # (Standby) button.

DVD:

When you are using a DVD player, set the switch to the DVD position. You can turn the DVD player on or off with the #(Standby) button.

2Press the VCR/DVD Control Button to control your VCR or DVD player

•If your device is not made by JVC, these buttons will not work.

•Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.

•You can use the p buttons to choose a TV channel the VCR will receive, or choose the chapter the DVD player plays back.

•Some models of DVD player use the p buttons for both operating the fast forward/backward functions and for choosing the chapter. In this case, the 253 buttons do not work.

•Set the VCR/TV/DVD switch to the TV position when you turn the TV on or off.

To use Dbutton

Some DVDs allow you to select the disc contents using the menu. When you playback these DVDs, you can select the subtitle language and sound-track language, etc. by using the DVD menu.

Still pictures