JVC LT-26C31SUE Additional menu operations, Using the ACI function Downloading data to a VCR

Page 33

Additional menu operations

 

 

 

Using the ACI function

Downloading data to a VCR

This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.

Caution

•If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1Press the 6 buttons to choose ACI START. Then press the abutton to start the ACI function

When you don’t want to use the ACI function:

Press the 6 buttons to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station. Follow the menu and use the 5 and 6 buttons. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function is not working properly. Press the abutton to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3 button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation

When the “Initial settings” have been made:

Return to step 6 of “Initial settings” on page 8.

When the “AUTO PROGRAM” has finished:

Return to step 4 of “AUTO PROGRAM” on page 27.

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Or, use the EDIT/MANUAL function to correct the programme number (PR) setting.

You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function.

•You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EN

1 Turn on the VCR

2 PressDOWNLOADTVthe aVCRbutton TheD0037TRANSFER..-ENdata..transmission.begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, check the following three items.

•Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

•Has the VCR power been turned on?

•Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all

its proper connections?

Then press the abutton to retry data transmission.

ENGLISH

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents English Deutsch Français LT-26C31BUE LT-26C31SUE LT-26C31BJE LT-26C31SJE„ Warning How to replace the fuse„ If in doubt consult a competent electrician „ Guidelines for safe operationEnglish Pixel defects „ Cleaning the screenDistance recommendations S.T. demonstrationContents Setting up your TV InstallationUsing the stand Remove the terminal cover Putting the batteries into the Remote controlConnecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outletWithout terminal covers Aerial Initial settings Link functions „ TV auto power on/VCR image view„ Pre-set download „ Direct RecTV buttons and functions Remote control buttons and functions Turn the TV on or off from standby modePress the #standby button to turn the TV on or off Watch images from external equipment „ Use the PR ListPR List „ Adjusting the visible area of the picture „ Choose the Zoom modeZoom function 3D Sound functionUsing the Freeze function Using the PIP functionDisplaying the current time Return to TV channel instantlyOperating a JVC brand VCR or DVD player Using the MULTI-PICTURE function„ To use Dbutton VCRTeletext function Using the List ModeBasic operation HoldSub-page CancelReveal SizeUsing the TV’s menu Picture Mode Picture SettingPicture Adjustment Colour TempPicture Features Digital VNRSuper DigiPure Movie Theatre Colour SystemAuto Aspect Colour ManagementSpeaker Sound SettingStereo / I BBEHeadphone VolumeTV Speaker OutputS-VIDEO input EXT SettingID List DubbingEXT-1/EXT-3 Sleep Timer FeaturesBlue Back Child LockDecoder EXT-2 Press the Number buttons to enter the ID numberIf you have forgotten the ID number Language InstallAuto Program Choose LANGUAGE, then press the abutton Move EDIT/MANUAL Insert Delete„ ID To cancel the Insert functionPress the red button to start the ID function Press the abutton to give a channel name ID to a TV channelWhen the Country setting is not United Kingdom To cancel the Manual functionPress the green or red button to search for a TV channel Other TV channelsAdditional menu operations Using the ACI function Downloading data to a VCRUsing the Decoder EXT-2 function Changing the Country settingTo return to the Install menu from the Country menu To cancel the Decoder EXT-2 functionBefore connecting anything Connecting external equipmentAdditional preparation Without terminal covers„ Video or sound signal output from the EXT-2 terminal „ Connecting headphones„ Connecting Speakers/Amplifier „ T-V Link compatible VCRChannel CH/CC numbersTroubleshooting „ Other concerns Design and specifications subject to change without notice SpecificationsVictor Company of JAPAN, Limited
Top Page Image Contents