JVC LT-26C31BUE manual Press the green or red button to search for a TV channel, Other TV channels

Page 32

INSTALL

„DELETE

1Press the 6 buttons to choose a TV channel

Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.

4Press the green or red button to search for a TV channel

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

5Press the green or red button repeatedly until the TV channel you want appears

2Press the yellow button to delete the TV channel

The TV channel is deleted from the programme numbers (PR) list.

„MANUAL

Preparation:

If you register a TV channel (SECAM-L system) from a French station, be sure to set the COUNTRY setting to FRANCE. If the COUNTRY setting is not FRANCE, follow the description “Changing the COUNTRY setting” on page 32 to change the COUNTRY setting to FRANCE, then start the MANUAL function.

1Press the 6 buttons to choose a Programme number (PR) to which you want to register a new TV channel

2Press the blue button to activate the MANUAL function

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV channel.

If you cannot hear the normal sound even when the picture of the TV channel appears normally: The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound.

6Press the abutton and register the TV channel to a programme number (PR)

The normal EDIT menu is resumed.

MANUAL

PR

ID

CH / CC

 

 

AV

 

 

 

 

 

 

 

 

01

BBC1

CH

21

 

 

02

 

 

 

CH

22

 

 

03

 

 

 

CH

23

 

 

04

 

 

 

CH

24

 

 

05

 

 

 

CH

25

 

 

06

 

 

 

CH

26

 

 

07

 

 

 

CC

01

(B / G)

 

08

 

 

 

CC

02

 

 

09

 

 

 

CC

03

 

 

 

 

 

 

 

 

 

 

 

 

BACK

 

 

 

SEARCH+

 

 

 

 

SEARCH-

 

 

 

 

TV

OK

 

 

 

FINE+

 

 

 

 

SYSTEM

 

 

 

FINE-

 

 

 

 

 

 

 

 

 

 

 

 

 

D0035-EN

To cancel the MANUAL function:

Press the h(information) button.

When the COUNTRY setting is not UNITED KINGDOM:

At the right side following the CH/CC number, the SYSTEM (broadcasting system) of the TV channel appears.

3When the COUNTRY setting is UNITED KINGDOM:

Continue to step 4

When the COUNTRY setting is not UNITED KINGDOM:

Press the 3 button to choose the SYSTEM (broadcasting system) for a TV channel you want to register

TV channel (SECAM-L system) from a French station:

Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the SECAM-L system.

Other TV channels:

If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.

30

Image 32
Contents LT-26C31BUE LT-26C31SUE LT-26C31BJE LT-26C31SJE English Deutsch FrançaisHow to replace the fuse „ Warning„ If in doubt consult a competent electrician „ Guidelines for safe operationEnglish „ Cleaning the screen Pixel defectsDistance recommendations S.T. demonstrationContents Using the stand Setting up your TVInstallation Putting the batteries into the Remote control Remove the terminal coverWithout terminal covers Aerial Connecting the aerial and video cassette recorder VCRConnecting the power cord to the AC outlet Initial settings „ TV auto power on/VCR image view Link functions„ Pre-set download „ Direct RecTV buttons and functions Press the #standby button to turn the TV on or off Remote control buttons and functionsTurn the TV on or off from standby mode PR List Watch images from external equipment„ Use the PR List „ Choose the Zoom mode „ Adjusting the visible area of the pictureZoom function 3D Sound functionUsing the PIP function Using the Freeze functionDisplaying the current time Return to TV channel instantlyUsing the MULTI-PICTURE function Operating a JVC brand VCR or DVD player„ To use Dbutton VCRUsing the List Mode Teletext functionBasic operation HoldCancel Sub-pageReveal SizeUsing the TV’s menu Picture Setting Picture ModePicture Adjustment Colour TempSuper DigiPure Picture FeaturesDigital VNR Colour System Movie TheatreAuto Aspect Colour ManagementSound Setting SpeakerStereo / I BBEVolume HeadphoneTV Speaker OutputEXT Setting S-VIDEO inputID List DubbingEXT-1/EXT-3 Features Sleep TimerBlue Back Child LockIf you have forgotten the ID number Decoder EXT-2Press the Number buttons to enter the ID number Install LanguageAuto Program Choose LANGUAGE, then press the abuttonEDIT/MANUAL MoveInsert DeleteTo cancel the Insert function „ IDPress the red button to start the ID function Press the abutton to give a channel name ID to a TV channelTo cancel the Manual function When the Country setting is not United KingdomPress the green or red button to search for a TV channel Other TV channelsUsing the ACI function Downloading data to a VCR Additional menu operationsChanging the Country setting Using the Decoder EXT-2 functionTo return to the Install menu from the Country menu To cancel the Decoder EXT-2 functionConnecting external equipment Before connecting anythingAdditional preparation Without terminal covers„ Connecting headphones „ Video or sound signal output from the EXT-2 terminal„ Connecting Speakers/Amplifier „ T-V Link compatible VCRCH/CC numbers ChannelTroubleshooting „ Other concerns Specifications Design and specifications subject to change without noticeVictor Company of JAPAN, Limited