JVC GM-F470S Present Time, Program SET Sunday Monday, Tuesday Wednesday, Thursday Friday Saturday

Menu Configuration—SET-UP MENU (cont.)

SCHEDULER

Item	To do	Setting value
PRESENT TIME	Adjust the clock.
	• For the setting procedure, see page 17.
PROGRAM SET
SUNDAY
MONDAY	Set the Power-on/off Timer for each day.
TUESDAY
WEDNESDAY	• For the setting procedure, see page 17.
THURSDAY
FRIDAY
SATURDAY
reset	Restore the default setting for “SCHEDULER.”

NETWORK SETTING

Item	To do	Setting value
MAC ADDRESS	Display the MAC address of the monitor.
IP ADDRESS

16

POWER ON DELAY

Sets the time till the power supply to the monitor’s circuits starts after the power button (POWER ON button

on the remote control or button on the main unit) is pressed.

If you are going to turn several monitors on at the same time, it is recommended to apply different values to the monitors to control rush current.

Setting value: 0 – 25

• The delay time is about 5 seconds under the setting “25”.

SYNC TERM.

Sets the resistance of sync signal of the RGB IN terminal. Normally, select “HIGH”. If you see pictures flickering or blurring on the screen because of a long connecting cord, set this to “LOW”.

Setting value: HIGH, LOW

COOLING MODE

Sets the speed of the internal cooling fans. When installing the monitor vertically, select “HIGH.”

Setting value: LOW, HIGH

•Fan A stops when “LOW” is selected.

•Fan B is always in operation while the power is on.

SUBNET MASK

DEFAULT

GATEWAY

DNS SERVER

reset

Make the network setting to control the monitor from the computer in the local area network.

• For details, see page 23.

Restore the default setting for all the items in “NETWORK SETTING.”

Fan A (only on GM-F520S) Fan A

CONTROL LOCK

Activates/deactivates the Control Lock. When this function is activated, you cannot operate the monitor with the buttons on the main unit.

Setting value: OFF, ON

•You can use the remote control and external control while the control lock is set. To release the lock, use the remote control or the SET-UP MENU button on the main unit.

REFRESH

Item	To do	Setting value
PIXEL SHIFT	Move picture displayed on the monitor in certain period.	OFF, ON
COLOR	Reverse color of the picture displayed on the monitor.	OFF, ON
REVERSE
reset	Restore the default setting for all the items in “REFRESH.”

Fan B

reset

Restores the default setting for all the items in the set-up menu.

all reset

Restores the default setting for all the items in the main menu and set-up menu (except for “LANGUAGE,” “HOUR METER,” “SECURITY LOCK,” and “PASS ID SETTING”).