JVC GM-F520S, GM-F470S, GM-F420S specifications Connections, Audio 1 OUT, Audio 2 OUT

Page 6

Connections

Select the most appropriate terminal referring to the illustration below and the tables on page 7 when connecting equipment to the terminals A - J .

CAUTION

•Before making any connections, turn off all the equipment.

•DO NOT connect the power cord until all connections are completed.

•Refer also to the user manual of each piece of equipment.

•Do not short-circuit 9 and ( speaker cords to each other. (Refer also to the instructions supplied with the speakers.)

6

To bind the cables (example):

	Insert the end of the cramp
	into the hole pointed with
	3.
	Push the tab to detach the
Cord cramp (supplied)	cramp.

A DVI-D (HDCP)

B RGB IN

RGB OUT

F

C	VIDEO IN	VIDEO OUT
C		G
D	AUDIO 1 IN
D
		AUDIO 1 OUT	H
			H
E	AUDIO 2 IN	AUDIO 2 OUT	I
		RS-232C
		RS-485
		MAKE/TRIG. (IN ONLY)
		LAN

External control equipment

For details, see page 20.

An external unit can be installed here.

Consult your dealer for more information.

J
AC OUT	AC IN
SENSOR
EXT. SPEAKER
OUT

Power supply for an external unit

(Max. 2A). Consult your dealer To wall outlet for more information.

Motion sensor (see page 18)

Attaching the power cord holder

The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN terminal.

• The power cord holder consists of two parts, a case and a cover.

1 AC IN terminal

2

Cover

Case

3

CAUTION

•Use only the provided screws.

•Make sure the plug will not be pulled out after the cover is attached to the case.

To detach the cover

Image 6

Contents GM-F520S GM-F470S GM-F420S Safety Precautions Power ConnectionHow to replace the fuse Screen MaintenanceDear Customer CabinetHow to attach the stand InstallationPrecautions To prevent an accidental fallRemote control Parts IdentificationMonitor Connections Audio 1 OUTAudio 2 OUT Video output terminals Video input terminalsAudio input terminals Audio output terminalsVideo RGB DVI-D Available signalsVideo signals GNDComputer signals RGB DVI-DDaily Operations Activating the Dual Display Selecting the picture modeDisplaying the current status Controlling only the monitor with specified IDMenu Operation Select an item by pressing 5 ∞ , then pressDisplay the menu Menu Configuration-MAIN Menu Multi Size Color SystemMulti Display Dual DisplayMenu Configuration-SET-UP Menu Program SET Sunday Monday Subnet Mask Default Gateway DNS ServerPresent Time Tuesday WednesdaySetting the Security Lock Using the timerInstallation and connection Outline of the motion sensorAngle of the sensor Setting About the external control Remote in SEL CNT. RJ45 OUTUsing the serial communication To assign the functions to the pin terminals How to Use External ControlUsing the MAKE/TRIG. system OperationUsing the LAN system To join the networkOperation on the web browser Motion Sensor Setting General-Purpose ControlFunction Aspect Direct Selection Full Troubleshooting Please Enter Pass ID Symptom Probable cause and corrective actionSetting Following are not malfunctionsSelf-diagnostic Report Sheet Self-diagnostic indicationIf the trouble still persists, follow the procedure below TEMP. OverSpecifications GeneralGM-F520S DimensionsInput/output terminals Motion sensorTop view Front view GM-F470SGM-F420S Rear viewPage Victor Company of Japan, Limited 0209TKH-MW-MT