Setting

Make the settings for the motion sensor on “MOTION SENSOR” of the main menu.

• For the menu operation procedure, see page 12.

NOTE

• While the function is controlled by the motion sensor, only the external control by the MAKE system can

control that function. You cannot use other external control and the buttons on the remote control and the

monitor.

PICTURE SETTING

SIZE SETTING

SIGNAL SETTING

AUDIO SETTING

FUNCTION SETTING

MOTION SENSOR

LANGUAGE:ENGLISH

AUTO POWER : OFF

VOLUME : ON

VALUE : +20

INPUT SELECT: OFF

INPUT : DVI SWAP DISPLAY: OFF BACK LIGHT : ON

VALUE : +10 SUSTAIN TIME : 40min. reset

OFF

•	The status of the monitor returns automatically to that before detecting human as the time set on “SUSTAIN
	TIME” passed without another detection. The monitor turns off when “AUTO POWER” is “ON”.
•	When “SUSTAIN TIME” is set to “0 min.”, the main unit takes the actions set for about 1 second. You can use
	the setting for checking the operations and detection area of the motion sensor.

If you set “SUSTAIN TIME” to “0 min.” while “AUTO POWER” is set to “ON”, the monitor repeatedly turns on and off, making further menu operations impossible. In this case, unplug the motion sensor from the monitor, open the menu, and change the setting of “AUTO POWER” to “OFF”.

•When you want to check the function of the motion sensor by setting “SUSTAIN TIME” to “0 min.”, it is recommended to select “ON” only for “VOLUME” or “BACK LIGHT”.

The information from the motion sensor can be used on the external control equipment connected through the RS-232C terminal to control the main unit.

Set all “MOTION SENSOR” settings to “OFF” when processing the information from the sensor on the external control equipment. Consult your dealer for more information.

SELECT : 5 ∞ ADJUST : 2 3 EXIT : MENU

Item	To do	Setting value
AUTO POWER	To turn on the monitor when the motion sensor detects the	ON, OFF
	motion of human, select “ON.” The monitor automatically
	turns off when the sensor detect no human motion for a
	certain period of time.
VOLUME	To change the volume level when the motion sensor detects	ON, OFF
	the motion of human, select “ON.”
VALUE	Adjust the volume level when “VOLUME” above is “ON.”	00 += 30
INPUT SELECT	To change the input when the motion sensor detects the	ON, OFF
	motion of human, select “ON.”
INPUT	Select the input when “INPUT SELECT” above is “ON.”	VIDEO, RGB, DVI
SWAP DISPLAY	To switch the main display and sub display of the Dual	ON, OFF
	Display when the motion sensor detects the motion of
	human, select “ON.”
BACK LIGHT	To change the brightness of the back light when the motion	ON, OFF
	sensor detects the motion of human, select “ON.”
VALUE	Adjusts the brightness level when “BACK LIGHT” above is	–20 += +20
	“ON.”
SUSTAIN TIME	Set the duration of the status set above when human is	0 min. += 60 min.
	detected.
reset	Restore the default setting for the items in “MOTION SENSOR.”