Unpacking DVD/HDTV Receiver and Accessories/Connection Overview
Make sure you have received all the accessories listed below with the High Definition Television Receiver.
HDTV Receiver / DVD Player
The DVD/HDTV Receiver is capable of receiving signals from cable and/or
Included with the Receiver are the following accessories.
Audio Cable/Video Cable/Component(YPbPr) Cable
RF Cable
Remote Control and 2 AA Batteries
AA AA
Audio/Video Jacks and Cables
The Audio/Video jacks provide excellent picture and sound quality. They are used for making most Audio/Video connections between components. The Audio/Video jacks may be color coded (yellow for video, red for right audio, and white for left audio). If your component has only one input for audio (mono), connect it to the left (white L/mono) audio jack on the DVD/HDTV Receiver.
Component Out Jacks and Cables
Component Cables are used to connect the DVD/HDTV Receiver to an industry standard YPbPr compatible HD Monitor (green for Y, blue for Pb, and red for Pr). Remember to connect the left and right audio cables. The YPbPr Component jacks carry only the picture signals, not the sound.
ANT LOOP OUT Jack and RF Cable
ANT LOOP OUT provides the signal from the ANT IN RF connection on the DVD/HDTV Receiver to the TV.
Remote Control
In addition to the DVD/HDTV Receiver, the remote control can be pro- grammed to control many other devices.
Batteries
To install the batteries, slide open the battery compartment and insert the two AA batteries provided.
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor. Angle: About 30° in each direction of the front of the remote sensor.
Remote Control Battery Installation
Detach the battery cover on the rear of the remote control, and insert two batteries (size AA) with 
and 
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (stan- dard, alkaline, etc.).
10