LG Electronics LST-3510A DVD and Video CD Operation Playing a DVD or Video CD, General Features

DVD and Video CD Operation

Playing a DVD or Video CD

Playback Setup DVD VCD2.0 VCD1.1

Turn on the TV and select the video input source con- nected to the DVD/HDTV Receiver.

Audio system: Turn on the audio system and select the input source connected to the DVD/HDTV Receiver.

1Press OPEN/CLOSE to open the disc tray.

2 Load your chosen disc in the tray, with the playback side down.

3READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu might appear instead.Press OPEN/CLOSE to close the tray.

If a menu screen is displayed

A menu screen may be displayed first after loading a DVD or Video CD with menus.

DVD

Use the 1 234 buttons to select the title/chapter you want to view, then press (SELECT) to start playback. Press TITLE or DISC MENU to return to the menu screen.

VCD2.0

Use the number buttons to select the track you want to view.

Press RETURN to return to the menu screen.

Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 43.

otes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Parental Control”, on page 44).

–DVDs may have a region code.

The DVD/HDTV Receiver will not play discs that have a region code different from the DVD/HDTV Receiver. The region code for this DVD/HDTV Receiver is

1 (one).

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Changing TITLEs DVD

1 /3

If a disc has more than one title, you can move to another title as follows:

Press DISPLAY in Stop mode, then press the appro- priate numbered button (0-9) to select a title number.

Changing CHAPTER/TRACKs

DVD VCD1.1 1 /12 1 /3

If a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

Press SCAN/SKIP . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.

Press . twice briefly to step back to the previous chapter/track.

To go directly to any chapter during DVD playback, press DISPLAY. Then, use 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9).

ote

For two-digit numbers, press the numbered buttons (0-9) in rapid succession.

Search DVD VCD2.0 VCD1.1

1.Press and hold SCAN/SKIP . or > for about two seconds during playback.

The DVD/HDTV Receiver will now go into SEARCH mode.

2.Press and hold SCAN/SKIP . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward).

With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward).

3.To exit SEARCH mode, press PLAY.

Still Picture and Frame-by-Frame Playback

DVD VCD2.0 VCD1.1

1.Press PAUSE/STEP during playback.

The DVD/HDTV Receiver will go into PAUSE mode.

2.You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.

3.To exit still motion mode, press PLAY.

DVD MENU OPERATION

45