LG Electronics LST-3510A owner manual Programming the Remote Control to Operate Other Devices

Programming the Remote Control to Operate Other Devices

The DVD/HDTV Receiver remote control is a multi-brand or universal remote control that can be programmed to operate most IR remote-controllable devices from other manufacturers.

ote

The remote control may not be able to control all models of other brands.

1To find out whether your remote control can operate a device without programming, turn on the device such as a VCR. Select the correspon- ding mode (VCR) with the MODE button on the remote control. While pointing at the device, use the POWER and CH +/– buttons to determine

if you can operate the device. If not, the remote control requires pro- gramming.Test your remote control.

2mode (DVD, TV, CATV or VCR) with the MODE button on the remote control.Turn on the device to be programmed. Select the corresponding

3The remote control is now ready to program the code for the device.Press the POWER button and the MUTE button simultaneously.

4First Method: If you press the CH + button repeatedly, the codes will change one at-a-time. When the right code is found, the device will turn off.

Second Method: Enter the code number using the number buttons on the remote control. The right code numbers for the corresponding device

can be found on the following pages. If the code is correct, the device will turn off.There are two ways to find the correct code for the device.

5Press the EXIT button to store the programming code.

6 Test the remote control functions to see if the device responds properly. If not, repeat from step 2.

REFERENCE

53