Before Operation (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the DVD/HDTV Receiver’s Digital Audio Output
Others
PBC Setup
PBC can be turned on or off using 
(SELECT).
OPERATION
according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connect the DVD/HDTV Receiver’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connect the DVD/HDTV Receiver’s DIGITAL OUT jack to an amplifi- er or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
PBC On
DVD MENU
PCM: Select “PCM” if you connect to a
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
43