Arcam manual Configuring the AVR250, Set-up mode, Set-up Menu Index, Navigating the Set-up menu

Page 11

Configuring the AVR250

The AVR250 ‘Set-up Menu’ has six ‘Basic’ and five ‘Advanced’ menu screens that take you through the configuration process. The ‘Basic’ menus enable you to match your AVR250 to your speakers; the ‘Advanced’ menus allow you to optimise the operation of your system. Screen shots of these menus are shown in shaded boxes on the following pages.

The best way to set up the AVR250 is using the on-screen display (OSD). To view the OSD for the initial set up, use the composite video output to connect to your TV. This is because the high quality video output has several display modes and may be incompatible with your high quality display device in its default configuration.

Set-up mode

To enter the Set-up menus press and hold the MENU button on the remote control or on the front panel, for at least two seconds. The ‘Set-up Menu Index’ is displayed on your display device.

Set-up Menu Index

The Set-up menu index page is the first page that is displayed when the Set-up menu is entered. This page allows you access to the six ‘Basic’ and five ‘Advanced’ menus.

Navigating the Set-up menu

... BY USING THE REMOTE CONTROL

The Set-up menu can be navigated by using the cursor (arrow) keys on the remote control. This is by far the easiest method.

1.To enter the Set-up menu, press and hold the MENU button (which is located immediately under the navigation buttons) for at least two seconds, until the Index page appears. (Pressing the menu button for just a short time will take

you to ‘Main Menu Screen 1’. If this happens, the Main Menu can be closed by pressing MENU for a second time.)

2.When the menu heading is highlighted, using the3and4 keys will navigate between menu

 

 

pages. Using this method to navigate between pages the first time the unit is being configured

OK

 

will help to ensure that no pages are missed out.

3.

Use the 5 and 6 keys to navigate up and down the menu lines.

 

 

4.

To change the setting for a particular menu item, highlight the item then use the34keys to

 

MENU

cycle through the options for that item.

5.Once you have set all the menu items on a page to have values that are appropriate for your system, move the menu highlight to the top of the screen (the menu heading) and press4 to move to the next menu page.

6.At any time, press the MENU button to return to the main Set-up menu index screen.

7.To save the changes you have made, return to the Set-up menu index page and highlight the ‘Save Set-up’ item at the bottom of the screen. Press the OK button to save the settings. Press OK again to exit the Set-up menu.

In addition to the above method of moving from page to page using the 34 keys, each menu page can be accessed directly from the Set-up menu index page. This is achieved by using the cursor keys to move the menu highlight to the desired page on the Index page, then pressing OK.

... BY USING THE BUTTONS ON THE FRONT PANEL OF THE AVR250

The AVR250 front panel controls can be used to configure the options. Follow the instructions given for using the remote control, in this case using the EFFECT/6 button for ‘down’, the MODE/5 button for ‘up’ and the volume control for left and right.

English

AVR250

E-11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AVR250 Safety compliance Safety guidelinesImportant safety instructions Contents Introduction Using this handbookSafety Before you startBefore making connections Inserting the batteries into the remote controlCables InstallationPositioning the unit AVR250 rear panelConnection of record decks Audio connectionsAnalogue audio connections Subwoofer outputHigh quality Component video connections Scart RGB 4-WIRE ConnectionVideo connections Composite/S-video video connectionsZone 2 connections Connecting loudspeakersUsing bare wire ended leads Using spade terminalsConnecting to a power supply Connecting the AM and FM antennasNavigating the Set-up menu Configuring the AVR250Set-up mode Set-up Menu IndexSelect Cvbs status General Settings2/S-VIDEOtrigger is not active in this mode ‘Basic’ Set-up MenusSurr L/R Small Large Subwoofer SettingsSpeaker Sizes Distance measurements for 5.1 Speaker delay settings Speaker Delay SettingsUse Channels 6+7 for Level settingsEX Settings Test Tone CycleADV 1 Speaker Eq ADV 2 Video SettingsADV 3 Digital Settings ‘Advanced’ Set-up MenusSave Set-up Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 5 Analogue SettingsRemote control Front panel display Switching on/offVolume control Operating your AVR250Zone HeadphonesInput selection Stereo DirectTreble/Bass Remote control buttonsEffects/FX ModeDeleting a preset Using the tunerTuning to a station Storing a presetUsing the Main Menu Effect Using ZoneDecoder splits the centre signal equally to IntroductionDigital multi-channel sources Surround modesMulti-channel source modes Two-channel source modesDSP Effects Modes Speaker positioningBi-amping your system Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Before you start important informationTroubleshooting Hum on an analogue input Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Unable to adjust bass and treble controlsScart S-video cable with audio back to processor Scart connectionsScart RGB cable with audio back to processor IR Remote Codes Command Command codePreset/Tune down Preset/Tune up Preset/Tune mode toggle System code Command Command codePreset Power toggle MuteRadio interference Technical specificationsContinual improvement policy On line registration GuaranteeWorldwide Guarantee Appendix Serial programming interface Command and response formatsPower / Alimentation / Betriebsbereitschaft / Stroom Example / Exemple / Beispiel / Voorbeeld Mute / Coupure du son / Stumm / DempenDe audio- en video-ingang naar een zone wijzigen Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone Änderung des Audio- oder Videoeingangs einer ZoneDe video-ingang voor de hoofdzone wijzigen Changes the video input for the main zoneChange l’entrée vidéo de la zone principale Änderung der Videoquelle der HauptzoneDirect mode / Mode Direct / Direktmodus / Modus Direct Navigation / Navigation / Navigation / Navigatie Effect / Effet / Effekt / EffectStore / Mémorisation / Speichern / Opslaan Preset / Présélection / Voreinstellung / VoorinstellingRDS / Système RDS / RDS / RDS Tune / Réglage / Senderabstimmung / Afstemmen
Related manuals
Manual 44 pages 3.26 Kb Manual 44 pages 59.25 Kb

AVR250 specifications

The Arcam AVR250 is a distinguished model in the realm of home theater receivers, embodying high-performance audio and video processing capabilities that cater to discerning audiophiles and home cinema enthusiasts alike. Designed by Arcam, a company renowned for its commitment to delivering premium sound, the AVR250 stands out through its thoughtful engineering and robust feature set.

At the heart of the AVR250 lies a powerful amplification stage capable of delivering a peak output of 100 watts per channel into 8 ohms, ensuring that even the most demanding speakers can be driven with ease. This level of power translates into dynamic audio experiences, whether you're enjoying your favorite movies, music, or gaming. The receiver also incorporates a sophisticated digital signal processing engine that enhances sound quality and ensures accurate reproduction of all audio formats.

One of the standout features of the AVR250 is its support for multiple surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables users to experience surround sound in its full glory, bringing their favorite films to life with immersive audio tracks that add depth and realism to the viewing experience. The AVR250 also boasts an array of connectivity options, including HDMI inputs that support high-definition video and audio signals, allowing seamless integration with modern multimedia devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its robust audio capabilities, the Arcam AVR250 is also equipped with video processing technologies. It can upscale standard definition content to high-definition resolution, ensuring that older media looks sharper and more vibrant on modern displays. The receiver also features video switching capabilities, allowing users to connect multiple video sources and effortlessly switch between them.

User-friendliness is another hallmark of the AVR250, featuring an intuitive on-screen display and remote control that make setup and operation straightforward. The receiver also offers advanced room correction technologies, which utilize microphone measurements to optimize sound performance in various room acoustics. This ensures that audiences receive the best possible sound quality tailored to their specific environment.

In summary, the Arcam AVR250 exemplifies a blend of power, quality, and versatility. With its advanced audio technologies, comprehensive connectivity options, and user-friendly design, this home theater receiver is poised to elevate cinematic experiences and music reproduction in any home. Whether you are an audiophile or a casual viewer, the AVR250 caters to a wide array of listening preferences, making it a worthy addition to any audio setup.
Top Page Image Contents