Arcam AVR250 Mute / Coupure du son / Stumm / Dempen, Example / Exemple / Beispiel / Voorbeeld

Page 38

Close a menu / Fermeture d’un menu /

Schließen eines Menüs / Een menu sluiten

Close one of the menus of the AVR250.

An error message is returned if the close instruction relates to a menu that is not open. For example, if the Main menu is open and a close instruction for the Set-up menu is received, then an error is returned.

Fermez l’un des menus du système AVR250.

Un message d’erreur s’affiche si l’instruction de fermeture est relative à un menu non ouvert. Par exemple, si le menu Main est ouvert et une instruction de fermeture pour le menu Set-up est reçue, un message d’erreur s’affiche.

Schließen eines der Menüs des AVR250

Bezieht sich der Befehl zum Schließen auf ein Menü, das nicht aktiv ist, wird eine Fehlermeldung ausgegeben. Wenn beispielsweise das Hauptmenü geöffnet ist und der Befehl zum Schließen des Set-up-Menüs empfangen wird, wird eine Fehler ausgegeben.

Een van de menu's van de AVR250 sluiten.

Er wordt een foutmelding geretourneerd als de instructie voor het sluiten betrekking heeft op een menu dat niet open is. Als het hoofdmenu bijvoorbeeld open is en er een instructie voor het sluiten van het set-up-menu wordt ontvangen, wordt er een fout geretourneerd.

Example / Exemple / Beispiel / Voorbeeld

Command/response sequence to close the main menu:

Séquence commande/réponse pour fermer le menu Main :

Befehls-/Rückmeldesequenz zum Schließen des Hauptmenüs: Opdracht- en responsreeks om het hoofdmenu te sluiten:

nCom.: PC_-11– followed by/suivie d’un/gefolgt von/gevolgd door (0xd)

nResp.: AV_-P10– followed by/suivie d’un/gefolgt von/gevolgd door (0xd)

COMMAND:

Byte:

Description:

 

 

CC

‘-’ (0x2d) (Command code)

 

 

P1

Zone:

 

‘1’ (0x31) – Zone 1

 

 

P2

Request:

 

‘1’ (0x31) – Close the Main Menu

 

‘2’ (0x32) – Close the Set-up Menu

 

‘3’ (0x33) – Close the Trim Menu

 

‘8’ (0x38) – Close any open menu

 

 

RESPONSE:

 

 

Byte:

Description:

 

 

RC

‘-’ (0x2d) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response:

 

‘0’ (0x30) – No menu is open

 

 

Mute / Coupure du son / Stumm / Dempen

Mute/unmute the audio output.

Activez/désactivez le son de la sortie audio.

Stummschaltung der Audioausgabe aktivieren/deaktivieren. De geluidsuitvoer dempen/dempen opheffen.

Example / Exemple / Beispiel / Voorbeeld

Command/response sequence to mute the main zone:

Séquence commande/réponse pour couper le son de la zone principale :

Befehls-/Rückmeldesequenz zum Stummschalten der Hauptzone: Opdracht- en responsreeks om de hoofdzone te dempen:

nCom.: PC_.10 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)

nResp.: AV_.P10 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)

COMMAND:

Byte:

Description:

 

 

CC

‘.’ (0x2e) (Command code)

 

 

P1

Zone:

 

‘1’ (0x31) – Zone 1

 

‘2’ (0x32) – Zone 2

 

 

P2

Request:

 

‘0’ (0x30) – Mute the zone

 

‘1’ (0x31) – Unmute the zone

 

‘9’ (0x39) – Request mute status

 

 

RESPONSE:

 

 

Byte:

Description:

 

 

RC

‘.’ (0x2e) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

‘2’ (0x32) – Zone 2

 

 

P2

Response:

 

‘0’ (0x30) – Zone is muted

 

‘1’ (0x31) – Zone is not muted

 

‘2’ (0x32) – Front panel is bright

 

 

AVR250

E-38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents AVR250 Safety compliance Safety guidelinesImportant safety instructions Contents Before you start Using this handbookSafety IntroductionInserting the batteries into the remote control Before making connectionsAVR250 rear panel InstallationPositioning the unit CablesSubwoofer output Audio connectionsAnalogue audio connections Connection of record decksComposite/S-video video connections Scart RGB 4-WIRE ConnectionVideo connections High quality Component video connectionsUsing spade terminals Connecting loudspeakersUsing bare wire ended leads Zone 2 connectionsConnecting the AM and FM antennas Connecting to a power supplySet-up Menu Index Configuring the AVR250Set-up mode Navigating the Set-up menu‘Basic’ Set-up Menus General Settings2/S-VIDEOtrigger is not active in this mode Select Cvbs statusSurr L/R Small Large Subwoofer SettingsSpeaker Sizes Speaker Delay Settings Distance measurements for 5.1 Speaker delay settingsTest Tone Cycle Level settingsEX Settings Use Channels 6+7 for‘Advanced’ Set-up Menus ADV 2 Video SettingsADV 3 Digital Settings ADV 1 Speaker EqADV 5 Analogue Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings Save Set-upRemote control Operating your AVR250 Switching on/offVolume control Front panel displayStereo Direct HeadphonesInput selection ZoneMode Remote control buttonsEffects/FX Treble/BassStoring a preset Using the tunerTuning to a station Deleting a presetUsing the Main Menu Introduction Using ZoneDecoder splits the centre signal equally to EffectSurround modes Digital multi-channel sourcesTwo-channel source modes Multi-channel source modesSpeaker positioning DSP Effects ModesBefore you start important information Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Bi-amping your systemTroubleshooting Unable to adjust bass and treble controls Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Hum on an analogue inputScart S-video cable with audio back to processor Scart connectionsScart RGB cable with audio back to processor Command Command code IR Remote CodesPower toggle Mute System code Command Command codePreset Preset/Tune down Preset/Tune up Preset/Tune mode toggleRadio interference Technical specificationsContinual improvement policy On line registration GuaranteeWorldwide Guarantee Command and response formats Appendix Serial programming interfacePower / Alimentation / Betriebsbereitschaft / Stroom Mute / Coupure du son / Stumm / Dempen Example / Exemple / Beispiel / VoorbeeldÄnderung des Audio- oder Videoeingangs einer Zone Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone De audio- en video-ingang naar een zone wijzigenÄnderung der Videoquelle der Hauptzone Changes the video input for the main zoneChange l’entrée vidéo de la zone principale De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Navigation / Navigation / Navigation / NavigatiePreset / Présélection / Voreinstellung / Voorinstelling Store / Mémorisation / Speichern / OpslaanTune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS
Related manuals
Manual 44 pages 3.26 Kb Manual 44 pages 59.25 Kb

AVR250 specifications

The Arcam AVR250 is a distinguished model in the realm of home theater receivers, embodying high-performance audio and video processing capabilities that cater to discerning audiophiles and home cinema enthusiasts alike. Designed by Arcam, a company renowned for its commitment to delivering premium sound, the AVR250 stands out through its thoughtful engineering and robust feature set.

At the heart of the AVR250 lies a powerful amplification stage capable of delivering a peak output of 100 watts per channel into 8 ohms, ensuring that even the most demanding speakers can be driven with ease. This level of power translates into dynamic audio experiences, whether you're enjoying your favorite movies, music, or gaming. The receiver also incorporates a sophisticated digital signal processing engine that enhances sound quality and ensures accurate reproduction of all audio formats.

One of the standout features of the AVR250 is its support for multiple surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables users to experience surround sound in its full glory, bringing their favorite films to life with immersive audio tracks that add depth and realism to the viewing experience. The AVR250 also boasts an array of connectivity options, including HDMI inputs that support high-definition video and audio signals, allowing seamless integration with modern multimedia devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its robust audio capabilities, the Arcam AVR250 is also equipped with video processing technologies. It can upscale standard definition content to high-definition resolution, ensuring that older media looks sharper and more vibrant on modern displays. The receiver also features video switching capabilities, allowing users to connect multiple video sources and effortlessly switch between them.

User-friendliness is another hallmark of the AVR250, featuring an intuitive on-screen display and remote control that make setup and operation straightforward. The receiver also offers advanced room correction technologies, which utilize microphone measurements to optimize sound performance in various room acoustics. This ensures that audiences receive the best possible sound quality tailored to their specific environment.

In summary, the Arcam AVR250 exemplifies a blend of power, quality, and versatility. With its advanced audio technologies, comprehensive connectivity options, and user-friendly design, this home theater receiver is poised to elevate cinematic experiences and music reproduction in any home. Whether you are an audiophile or a casual viewer, the AVR250 caters to a wide array of listening preferences, making it a worthy addition to any audio setup.
Top Page Image Contents