Arcam AVR250 manual ‘Advanced’ Set-up Menus, ADV 1 Speaker Eq, ADV 2 Video Settings, Loudspeakers

Page 16

The ‘Advanced’ Set-up Menus

ADV 1 – Speaker Eq.

This allows fine adjustment of bass and treble in 1dB steps (up to ±6dB) for each of the speakers in the system. Use these adjustments sparingly to compensate for speaker response problems caused by positioning, adjacent surface textures, or mixed brands of

loudspeakers.

Work with one speaker on at a time and, as an example, use the bass control to reduce boom problems for speakers placed in corners, and the treble control for speakers placed near reflective surfaces. We recommend trying to obtain a good speaker response by speaker placement first, then apply speaker equalisation last.

The tone control nominal corner frequencies are at 100Hz and 8kHz, shelf type.

Auto Stereo Tone Bypass: Set this item to YES if, when a stereo input signal is detected (analogue or digital), the tone adjustments set on this page are to be by-

passed. (Note that this does not switch the AVR250 into ‘Direct’ mode, it simply sets the tone controls to zero.)

ADV 2 – Video Settings

This menu allows advanced adjustment of the video settings for your AVR250.

Zone 1 OSD: Selects whether the main zone OSD is on or off.

n

n

When set to ON‚ all user adjustments that are made during the general use of the AVR250 are displayed on the screen. This includes the adjustment of the volume control, the inputs selected and the set-up menus.

When set to OFF‚ there will be no display of the general user adjustments – only the set-up menus and the main menus are displayed.

It is recommended you keep the OSD turned ON‚ since if you cannot see the front panel of the AVR250 you will have no idea if any adjustments you have made to the processor are correct or to your liking.

Video Inputs : Composite and S-video inputs for DVD, Sat, AV, VCR and PVR have their audio and video assigned to track each other by default. The five ‘Video Input’ lines for Tape, CD, FM, AM and DVD-A allow assignment of a video source to these normally audio-only sources. If desired, it is possible to allocate the same video source to more than one audio input. This facility allows you to listen to an audio source and view a separate video source at the same time – for example, you can listen to radio while watching TV for a sports simulcast.

HQ Video DVD, AV and SAT: Allocate the high quality component or RGB video inputs to any source buttons. For example, to assign the Component/RGB video from the ‘HQ Video DVD’ input to the DVD button, set the ‘HQ Video DVD’ item in this menu to ‘DVD’.

If HQ-VIDEOis set to RGB (as described on page 13) and an HQ-video input is assigned to a button, the AVR250 assumes that RGB signals are present for that input if a composite signal is found on the corresponding composite input. If this assignment is made but no RGB signals are supplied, the display will be blank for the assigned source.

ADV 3 – Digital Settings

Coaxial inputs and Optical inputs. Each of the digital inputs can be assigned to any of the seven stereo source buttons (CD, TAPE, DVD, SAT, AV, VCR and PVR), or can be assigned No button.

This menu page lists the physical inputs, as per the back panel, on the left hand side of the screen, with the buttons used to select the inputs listed on the right hand side.

Each digital input can be allocated only to one source button. For example, if you choose the ‘Coaxial DVD input’ to be assigned to the DVD button, then the choices for the other digital inputs are: CD, TAPE, SAT, AV, VCR, PVR and NO BUTTON. If you wish to re- allocate the DVD input to a different button, ‘Coaxial DVD input’ must be assigned to a different button (or No button) before you can re-assign the DVD input.

AVR250

E-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents AVR250 Important safety instructions Safety guidelinesSafety compliance Contents Using this handbook SafetyBefore you start IntroductionInserting the batteries into the remote control Before making connectionsInstallation Positioning the unitAVR250 rear panel CablesAudio connections Analogue audio connectionsSubwoofer output Connection of record decksScart RGB 4-WIRE Connection Video connectionsComposite/S-video video connections High quality Component video connectionsConnecting loudspeakers Using bare wire ended leadsUsing spade terminals Zone 2 connectionsConnecting the AM and FM antennas Connecting to a power supplyConfiguring the AVR250 Set-up modeSet-up Menu Index Navigating the Set-up menuGeneral Settings 2/S-VIDEOtrigger is not active in this mode‘Basic’ Set-up Menus Select Cvbs statusSpeaker Sizes Subwoofer SettingsSurr L/R Small Large Speaker Delay Settings Distance measurements for 5.1 Speaker delay settingsLevel settings EX SettingsTest Tone Cycle Use Channels 6+7 forADV 2 Video Settings ADV 3 Digital Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqSaving Settings and Exit Set-up ADV 4 Zone 2 SettingsADV 5 Analogue Settings Save Set-upRemote control Switching on/off Volume controlOperating your AVR250 Front panel displayHeadphones Input selectionStereo Direct ZoneRemote control buttons Effects/FXMode Treble/BassUsing the tuner Tuning to a stationStoring a preset Deleting a presetUsing the Main Menu Using Zone Decoder splits the centre signal equally toIntroduction EffectSurround modes Digital multi-channel sourcesTwo-channel source modes Multi-channel source modesSpeaker positioning DSP Effects ModesBi-wiring and bi-amping loudspeakers Bi-wiring your loudspeakersBefore you start important information Bi-amping your systemTroubleshooting Source switching changes randomly or freezes on one source No Zone 2 audio when playing DTS filmUnable to adjust bass and treble controls Hum on an analogue inputScart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Command Command code IR Remote CodesSystem code Command Command code PresetPower toggle Mute Preset/Tune down Preset/Tune up Preset/Tune mode toggleContinual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration Command and response formats Appendix Serial programming interfacePower / Alimentation / Betriebsbereitschaft / Stroom Mute / Coupure du son / Stumm / Dempen Example / Exemple / Beispiel / VoorbeeldChanges the audio and video input to a zone Change l’entrée audio et vidéo d’une zoneÄnderung des Audio- oder Videoeingangs einer Zone De audio- en video-ingang naar een zone wijzigenChanges the video input for the main zone Change l’entrée vidéo de la zone principaleÄnderung der Videoquelle der Hauptzone De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Navigation / Navigation / Navigation / NavigatiePreset / Présélection / Voreinstellung / Voorinstelling Store / Mémorisation / Speichern / OpslaanTune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS
Related manuals
Manual 44 pages 3.26 Kb Manual 44 pages 59.25 Kb

AVR250 specifications

The Arcam AVR250 is a distinguished model in the realm of home theater receivers, embodying high-performance audio and video processing capabilities that cater to discerning audiophiles and home cinema enthusiasts alike. Designed by Arcam, a company renowned for its commitment to delivering premium sound, the AVR250 stands out through its thoughtful engineering and robust feature set.

At the heart of the AVR250 lies a powerful amplification stage capable of delivering a peak output of 100 watts per channel into 8 ohms, ensuring that even the most demanding speakers can be driven with ease. This level of power translates into dynamic audio experiences, whether you're enjoying your favorite movies, music, or gaming. The receiver also incorporates a sophisticated digital signal processing engine that enhances sound quality and ensures accurate reproduction of all audio formats.

One of the standout features of the AVR250 is its support for multiple surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables users to experience surround sound in its full glory, bringing their favorite films to life with immersive audio tracks that add depth and realism to the viewing experience. The AVR250 also boasts an array of connectivity options, including HDMI inputs that support high-definition video and audio signals, allowing seamless integration with modern multimedia devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its robust audio capabilities, the Arcam AVR250 is also equipped with video processing technologies. It can upscale standard definition content to high-definition resolution, ensuring that older media looks sharper and more vibrant on modern displays. The receiver also features video switching capabilities, allowing users to connect multiple video sources and effortlessly switch between them.

User-friendliness is another hallmark of the AVR250, featuring an intuitive on-screen display and remote control that make setup and operation straightforward. The receiver also offers advanced room correction technologies, which utilize microphone measurements to optimize sound performance in various room acoustics. This ensures that audiences receive the best possible sound quality tailored to their specific environment.

In summary, the Arcam AVR250 exemplifies a blend of power, quality, and versatility. With its advanced audio technologies, comprehensive connectivity options, and user-friendly design, this home theater receiver is poised to elevate cinematic experiences and music reproduction in any home. Whether you are an audiophile or a casual viewer, the AVR250 caters to a wide array of listening preferences, making it a worthy addition to any audio setup.
Top Page Image Contents