Optoma Technology EX530 manual Control Panel, Keystone+, Up arrow, Press to activate Help function

User Controls

Control Panel

			Temp	Lamp	Power
	. Keystone +
. Source	Enter/Help	Re-Sync .	Menu	AV-Mute	Power
	. Keystone -

Using the Control Panel

▲/Keystone+	•Adjust the image Keystone positively.
(Up arrow)	•Navigates and changes settings in the OSD.
◄/Source	•Press Source to select an input signal.
(Left arrow)	•Navigates and changes settings in the OSD.
	Confirm your item selection./
Enter / Help	Press to activate Help function
	(disabled in OSD menus).
	See page 51 Appendices for help function.
►/Re-Sync	•Automatically synchronizes the projector to
	the input source.
(Right arrow)
	•Navigates and changes settings in the OSD.
Menu	Press Menu to launch the on-screen display
	(OSD) menu. To exit OSD, Press Menu again.
AV-Mute	Momentarily turns off / on the audio and video.
Power	Refer to the “Power On/Off the Projector”
	section on page 15.
	Green	Unit is powered on and working
		correctly.
Power LED	Flashing	Unit is on stand-by/cooling down.
	Green
	Off	Unit is powered off.
	On	Lamp not ready—do not press the
Lamp LED		power button.
	Off	Lamp is in normal state.
Temp LED	On	System over temperature
	Off	Normal state

21English