Appendices
Image has vertical flickering bar
4Useinformation.Frequency to make an adjustment. See page 36 for more
4Check and reconfigure the display mode of your graphic card to make it compatible with the projector.
Image is out of focus
4Make sure the lens cap is removed.
4Adjusts the Focus Ring on the projector lens.
4Make sure the projection screen is between the required distances from the projector. See pages
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16:9 format in OSD. If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following:
4Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
4Adjust the Zoom Ring on the top of the projector.
4Move the projector closer to or further from the screen.
4Press [Menu] button on the remote control or projector panel, go to Display Format and try the different settings.
55 English