S E C T I O N 3
Setting Up Optiflex Using Symphony
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦ How to Select Video from the System Options ♦ How to Set Up Video Options on the Symphony
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
How to Enable Video on Symphony
Symphony can either be used to view video events locally when attached to a Honeywell Vista control panel, or to view events remotely over the Internet using Optiflex Connect. In either case, follow the steps below to allow the viewing of video events through Symphony.
Symphony allows you to place buttons on the "Home" screen. The SECURITY button is always displayed and cannot be removed. Buttons that can be added are Video, Lighting, and Heating/Cooling. Prior to Video setup, the “Home” screen VIDEO button should be selected from the Options screen. To avoid confusion to the user, only buttons whose options are functional in the system should be displayed. To enable video, do the following:
1.Press the SECURITY button on the “Home” screen. The “Arming” screen is displayed.
2.Press the MORE CHOICES button. The “More Choices” screen is displayed.
3.Press the SETUP button on the “More Choices” screen. The “Setup” screen is displayed.
4.Press the ADVANCED SETUP button. The Enter Authorized Code: authorization screen is displayed.
5.Enter your
6.Press the Central Station button. The “Central Station” menu screen is displayed.
7.Press the Options button on the “Central Station” screen. A
8.Press the Done button to accept the setting. Symphony returns to the "Central Station" menu screen.