How to Set Up Video Options on Symphony

Optiflex Installation and Setup Guide

How to Set Up Video Options on Symphony

1.Press the SECURITY button on the “Home” screen. The “Arming” screen is displayed.

2.Press the MORE CHOICES button. The “More Choices” screen is displayed.

3.Press the SETUP button on the “More Choices” screen. The “Setup” screen is displayed.

4.Press the ADVANCED SETUP button. The “Enter Authorized Code:” screen is displayed.

5.Enter your 4-digit Installer code. The “Advanced Setup” menu screen is displayed.

6.Press the Video Setup button. The “Video Setup” screen is displayed.

7.Edit Camera-1 name and label and position. Save the data. Repeat this for each camera.

8.Select default camera for local viewing on Symphony.

9.Select NTSC default camera for NTSC composite monitor viewing.

In order to enable remote viewing over the Internet using either Symphony or a PC, you must obtain Optiflex Connect through AlarmNet. For information on how to set your system up for remote viewing, go to http://www.security.honeywell.com/hsce/alarmnet/optiflex.

3-2