OPERATING INSTRUCTIONS
Indicating Lamp
Main power switch
•The main power switch is located at the back, on the right side.
Power button
POWER button
26
Turning Power On and Off
•To turn the PDP TV power ON, press the main power switch on the PDP TV main unit to ON, and then press the POWER button of control panel or the POWER button on the remote control.
•To turn the TV power OFF, press the POWER button of control panel or the POWER button on the remote control, and then press the main power switch on the PDP TV main unit to OFF.
•During normal use, the main power switch is set in the ON position, and the monitor can then be turned ON/OFF using the POWER button or the POWER button on the remote control.
Indicating lamp
Indicating Lamp | Power Status | Operating | |
Off | Off | When the main power | |
switch is set to OFF. | |||
|
| ||
| Off | When the main power | |
Lights Red | switch is ON, and the | ||
| POWER button is OFF. | ||
|
| ||
| Off | When the main power | |
Lights Orange | switch is ON, and the | ||
(Power Save) | |||
| power button is ON. | ||
|
| When the main power | |
Lights Green | On | switch is ON, and the | |
|
| power button is ON. |
When the indicating lamp lights in orange or the message “CABLE NO INSERT”or “Blue picture” appears on the screen, there is something unusual about the status of reception. See “Power Save Mode” or “Symptoms That Seemingly Appear to be Failures.”
45 ~ 47
ATTENTION
•Avoid repeatedly turning the PDP TV on and off at short time intervals. Failures might result from such operation.
•Turn off the main power switch before leaving the PDP TV out of use for an extended period of time.
•If a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.