OPERATING INSTRUCTIONS (continued)
General Settings
1.Press the DTT MENU button to display the MENU banner.
2.Use the arrow keys ▲ or ▼ to highlight “General Setting” and press ENTER key on remote control to show four
3.It will show “Audio Setup”, “Option Setup”, “Change Pin” and “Local Time”.
Audio Setup
a. Select the “Audio setup” of the “General Setting” OSD.
b. You may choice PCM or Dolby then press ENTER key on the remote control.
c. Choice “OK” then the settings will be saved; if not press “EXIT”.
Option Setup
a. Select the “Option setup” of the “General Setting” OSD.
b. Information box timeout: by adjust the timeout, you may change the time interval of the menu showing when you press DTT menu button on the remote control or doing the channel change.
c. Choice “OK” then the settings will be saved; if not press “EXIT”.
41