COMPONENT NAMES (continued)
Remote control (continued)
19.P. SIZE button
Press repeatedly to change image to different size. Sizes include Full, 4:3 Standard, Panoramic, 4:3 Zoom and 16:9 zoom.
4:3 Standard | Use this side mode to display conventional (4:3) images. Side panels (gray areas) are placed to |
| the left and right of the image to preserve the original aspect ratio of the source. Note: Use this |
| mode for only 15% of your total viewing time to prevent uneven aging of the phosphors. |
| Phosphors in the lighted area of the picture will age more rapidly than the gray areas. |
16:9 Zoom | Use this side mode to display conventional (4:3) sources by linearly increasing image expansion |
| from the center towards the edges of the display area in order to fill it. |
4:3 Zoom | Use these side modes to zoom in on conventional (4:3) sources. |
Full | Use this side mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 side |
| ratio. |
Panoramic | Use this side to |
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
(1)
Input |
| Full |
| 4:3 Standard |
| Panoramic | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16:9 Zoom |
| 4:3 Zoom |
|
|
|
(2) Component(720p/1080i)/HDMI Input
InputFull
(3)RGB Input
Auto adjust to full size. (Aspect ratio is not changeable.)
ATTENTION
Using a wide picture size.
•This TV has a picture size selection feature. If an incompatible size is selected to play certain software, such as a TV program, the image would appear different from original. Take this into consideration when making picture size choices.
•Use of this TV in its enlarged display mode with the wide feature enabled in coffee shops and other establishments for commercial or public viewing purposes could infringe on the copyright holders right protected by Copyright Law.
•When a normal 4:3 image is displayed over the entire picture in the Panoramic mode, parts of the periphery of the image may disappear and appear distorted in some cases. Use the 4:3 mode to view image, which were created in 4:3 mode.
20. ZOOM +/- buttons
This function not support.
21.PIP SWAP button
Press to exchange the main video signal source with PIP video signal source.
14