Hitachi 42PD580DTA Other Functions Signal Check Analog RGB mode, Signal Check TV/Video mode

OTHER FUNCTIONS (continued)

Signal Check (Analog RGB mode)

Changes in the signal status are displayed on the screen as they arise.

Status	Display		Action
When Mode Display is set to	A guide is displayed for the
ON, the input signal is	input terminal and the
switched or when the	horizontal and vertical sync
RECALL button is pressed.	frequency.
When the sync signal is no	• A guide displays No Input	Recheck the personal
longer detected.	Signal, and Power Save	computer power switch
	(for approx. 5 sec.)	status and the
	• When the condition	connection status.
	continues where the sync
	signal cannot be detected,
	indicator lamp of power
	source changes in orange
	and the mode switches to
	power save mode.
When the input signal does	A guide displays No Input	Recheck the input
not match the monitor	Signal.	signal specifications.
specifications or is in an
unstable status.

Signal Check (TV/Video mode)

Changes in the signal status are displayed on the screen as they arise.

Mode	Status	Display	Action
TV	When the TV signal	• A guide is displayed for	• Recheck the antenna
	is no longer	searching and counting down	connection status.
	detected.	2 minutes.	• Reception other than
		• If the TV signal cannot be	those of broadcasting
		detected after 2 minutes, the	stations can be
		PDP TV will turn off directly	considered.
		and indicator lamp is going to
		red.
Video	When the sync.	• A guide displays No Sync.	• Recheck the device
	signal is no longer	Signal in orange.	power switch status
	detected.		and the connection
			status.
			• Recheck the device
			connection status.
			• Recheck the input
			signal specifications.

Analog RGB 1024X768 60Hz

CABLE NO INSERT

(Blue picture)

44