Hitachi 42PD580DTA user manual Operating Instructions Image Menu, Selected characters

OPERATING INSTRUCTIONS (continued)

Image Menu

TV/Video Mode

Selected characters	W			X
	Full		4:3 Standard
	16:9 zoom		Panoramic
P. Size		4:3 Zoom
	Available for
	TV/Composite/S-Video/Component(480i/480p/576i/576p)
	signals.
			Full
	Component(720p/1080i)/HDMI
	Black		Gray
Set Border Color

Noise Reduction	Off	Level1	Level2	Level3
3:2 Pull Down		Disable	Enable
Reset	(off the function)			-

Setup hint

Adjust to preference. Please refer to 14 for more detail. (Not available in Teletext mode)

Adjust to when display 4:3 video.

This turns the gray sidebars to the black sidebars when watching normal mode screen size area. It is always set to Off when the monitor powered On. It is recommended to set to Gray to reduce the panel image retention.

(Not available in Teletext mode) Adjust to when display static image.

If this is set from Off to Level3, it helps to reduce the noise interference visible on the static image, especially in the weaker signal reception areas.

Adjust to improve the picture quality.

The original factory settings for the items of this Menu page can be restored by pressing the ENTER button.

PC Mode

Selected characters	W	X	Setup hint
	Slows the dot clock	Advances the dot
Clock Phase	phase (shifts slightly	clock phase (shifts	Adjust for clear character visibility.
	to left).	slightly to right).
	Reduces the dot clock	Increases the dot
	frequency (shrinks the	clock frequency
Horizontal Clock	right side).	(expands the right	Adjust for maximum character clarity.
		side).
			Pressing the ENTER button, automatic regulation is started.
Auto Adjust	(off the function)	-	Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are
			adjusted automatically.

31