CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC Center below.
2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.Press the VID2~VID5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically after approximately four seconds.
5.Press the ANT button to return to the previous channel.
Rear Panel of AVC Center
FIRST TIME USE
VIDEO VIDEO
L | L/(MONO) |
| |
R | R |
AUDIO | AUDIO |
MONITOR OUT | INPUT 4 |
VIDEO
L/(MONO)
R
AUDIO
INPUT 3
ANT B | TO CONVERTER | ANT A |
| Y/VIDEO |
| Y |
|
|
|
|
|
|
| L |
PB |
| PB |
|
| AUDIO |
L/(MONO) | L/(MONO) |
| |||
|
|
| |||
|
|
|
|
| |
PR | R | PR | R |
| R |
| AUDIO |
| AUDIO |
| |
IR BLASTER | INPUT 2 |
| INPUT 1 | INPUT 1 | AUDIO OUT |
ANALOG INPUT
Please use HITACHI specified cable.
TO MONITOR
L/(MONO)
AUDIO
R | AC IN |
|
|
RGB | TruBass SRS and symbol are trademarks of SRS Labs, Inc. |
Back of
RL V VCR
OUTPUT
VCR
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 4 in example on page 22). Refer to your VCR operating guide for more information on line
15