Connecting S-VIDEO VCR or Laserdisc Player

FIRST TIME USE

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING S-VIDEO VCR OR LASERDISC PLAYER

1.Connect the cable from the S-VIDEO OUT of the S-VHS VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the AVC Center below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID3~VID5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

Rear Panel of AVC Center

ANT B

TO CONVERTER

ANT A

ANALOG INPUT

Please use HITACHI specified cable.

S-VIDEO

Y/VIDEO

TO MONITOR

VIDEO

L/(MONO)

AUDIO

DVI-HDTV

AC IN

AUDIO

MONITOR OUT

INPUT 4

INPUT 3

IR BLASTER

INPUT 2

INPUT 1

AUDIO OUT

RGB

TruBass SRS and

symbol are trademarks of SRS Labs, Inc.

RL V S-VIDEO OUTPUT

Back of VCR or Laserdisc Player

VCR or Laserdisc Player

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 4 in example on page 22). Refer to your VCR operating guide for more information on line input-output connections.

CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1

1.Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the AVC Center below.

2.Connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the HDTV set top box or DVD player to the INPUT (AUDIO/L) jack.

4.Press the VID1 button to view the program from the HDTV set top box or DVD player. The VIDEO OSD label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

Rear Panel of AVC Center

ANT B

TO CONVERTER

ANT A

ANALOG INPUT

Please use HITACHI specified cable.

S-VIDEO

Y/VIDEO

TO MONITOR

VIDEO

L/(MONO)

AUDIO

DVI-HDTV

AC IN

AUDIO

MONITOR OUT

INPUT 4

INPUT 3

IR BLASTER

INPUT 2

INPUT 1

AUDIO OUT

RGB

TruBass SRS and

symbol are trademarks of SRS Labs, Inc.

PR PB

OUTPUT

D-VHS

DIGITAL OUTPUT

Back of

D-VHS

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.The DVI-HDTV input on INPUT 1 contains the copy protection system called High-bandwidth Digital Content Protection (HDCP). HDCP is a cryptographic system that encrypts video signals when using DVI connections to prevent illegal copying of video contents.

3.DVI is not a “NETWORK” technology. It establishes a one-way point-to-point connection for delivery of uncompressed video to a display.

4.The connected digital output device controls the DVI interface so proper set-up of device user settings determines final video appearance.