HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION
SPEAKER INSTALLATION 42”
1.Screw the speaker holder to the speakers as shown below.
Speaker Holder | Screw x2 |
|
| (R) | (L) |
SPEAKER INSTALLATION 50”
1.Screw the speaker holder to the speakers as shown below.
Screw x2
Speaker Holder
(R) |
Speaker
Holder
(R)
(R)(L)
FIRST TIME
Screw x2
2.Loosen 4 screws (A) (two on the left and two on the right).
3.Completely unscrew 4 screws (B) (two on the left and two on the right).
4.Hook the speaker holders to the loosened screws (A).
5.Screw the speaker holders to the Display Monitor with screws (B).
6.Tighten screws (A).
(R)Speaker
Unscrew (B)
Completely
Loosen 
Screw
(A)
| Insert | |
| horizontally from | |
Bottom View | the side | |
Screw in | ||
of Speaker | ||
screws (B) | ||
Holder | ||
|
Hook this portion to the loose screws
(A).
Speaker Holder
Screw x2
2.Screw in screw (C).
3.Hook the upper speaker holder to the screw in (C).
4.Screw in the lower speaker holder (D).
5.Tighten screws (C) and (D).
Screw in screws (C)
Screw in screws (D)
USE
7. Connect the speaker wires as shown below. (Make sure the | 6. Connect the speaker wires as shown below. (Make sure the |
core is toward the display monitor side.) | core is toward the display monitor side.) |
Core
Ferrite Core
NOTES: Do not connect speakers simultaneously to the speaker terminal of the Plasma TV and an external amplifier.
5