Hitachi 32HDT50, 50HDT50, 42HDT50 Hookup Cables, Antenna Connections to Rear Jack Panel

Page 8

HOOKUP CABLES

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

FIRST TIME USE

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel and front control panel.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

AUDIO OUT

2

3.8mm

STEREO

RCA TYPE

MINI-PLUG

PLUGS

Stereo Cable (3.5 mm plug to 3.5 mm plug)

This cable is used to connect from external audio out to the audio input of the AVC Center (ex. RGB Input).

IR Mouse Cable (Provided)

Connect the IR Mouse to the IR output on your AVC center when A/V Network is used. You must place the IR mouse in front of the corresponding IR window of your cable box and VCR. This connection allows your TV to control your cable box and VCR.

5

4

3

2

 

1

10

9

8

7

6

15

14

13

12

 

11

D-SUB MINI 15-Pin Cable

This cable is used to connect a computer output to the D-SUB input located on the rear panel of the AVC Center. The resolution should be set correctly to display the signal on the Plasma Television.

Subwoofer Cable (Provided)

This cable is used to connect an external audio component input to the subwoofer output of the Display Monitor.

Monitor Connection Cable (Provided)

This cable is used to connect the Display Monitor to the AVC Center.

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CATV (Cable TV)

When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal.

VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into the antenna terminal on the TV.

To second antenna or cable system

To outdoor antenna or CATV cable

To outdoor VHF or UHF antenna

To UHF

ANT A/ANT B

To outdoor antenna

 

antenna

 

or CATV system

When both VHF and UHF antennas are connected

Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.

Antenna Mixer

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Important Safety Instructions Remote ControlUsing the RGB Input First Time USEPower Source Safety Tips Or table specified by the manufacturer, orCart/apparatus combination to avoid injury Prevention of Screen BurnAccessories First Time USEHOW to Setup Your NEW Hitachi Plasma Television Speaker InstallationHolder Ferrite CoreAVC Vertical Position Using AVC Stand Securing to a wallAntenna LocationHOW to SET UP Your NEW Hitachi Plasma Television ViewingHookup Cables Antenna Connections to Rear Jack PanelVolume level Front Panel ControlsMENU/SELECT button INPUT/EXIT buttonPhones Jack Audio OUT Rear Panel JacksMonitor OUT SUB-POWER button RGB Analog InputRGB Audio Input DVI Hdtv Digital InputConnecting Plasma Display Monitor to AVC BOX Connecting External Video SourcesBefore Operating External Video Source Connecting External Video SourcesConnecting a Monaural Audio Source to INPUT2~INPUT5 Connecting a Stereo VCR or Stereo Laserdisc Player Connecting S-VIDEO VCR or Laserdisc Player Rear Panel of AVC CenterSee page 23 for tips on Rear Panel Connections DVD PlayerConnecting External AUDIO/VIDEO Devices Connecting External Audio AmplifierConnecting AV Network AV Network Setup Wizard Hitachi AV NET SET UPAUDIO/VIDEO Codes for AV Network not for remote control Rear Panel Connections Rear Panel of Display MonitorTips on Rear Panel Connections Remote Light ButtonSET-TOP-BOX STB HOW to USE the Remote to Control Your Plasma TVCable CBL CD, PVR, AMP buttons Channel selector buttonsSleep button Info buttonAV NET button EquipmentSelect soft key to be learned HOW to USE the Remote To Control Your Plasma TVAV NET Learning Wizard Aspect button ExpandedRatio 480i/480p InputVOLUME, Mute button Video buttonMenu button Exit buttonLast Channel Last CH button PICTURE-IN-PICTURE buttonsSurf button 23 VID1 ~ VID5PIP button Split Mode PIPPICTURE-IN-PICTURE PIP POP Mode PIP PIP Mode PIPPIP Mode button Swap button with PIP onFreeze button With PIP OFF Split FREEZEwith PIP offStrobe FREEZEwith PIP OFF POP Main Freeze with PIP OFFUsing the Remote to Control VCR Functions Operating the precoded function for your VCRPrecoded VCR Buttons Exclusive TV ButtonsUsing the Remote to Control Cable BOX Functions Operating the precoded function for your cable boxCable CBL button Precoded Cable BOX buttonsSET-TOP-BOX STB button Precoded SET-TOP-BOX/SATELLITE Receiver but- tonsUsing the Remote to Control DVD Functions Operating the precoded function for your DVD playerPrecoded DVD Buttons These buttons transmit the chosen precoded DVD codesUsing Your Remote To Control Additional Audio Equipment Operating the precoded function for your Audio componentAUDIO/VIDEO Codes for Remote Control only VCR BRAND. . . . . . . . . . . . . . . . . CodeOSD On-Screen Display Video Audio Aspect Chan Manager Locks Picture Mode VideoON-SCREEN Display Press down on Thumb Stick to select the function settingsUse the Thumb Stick Pure depending on the user’s preference Reset Video SettingsColor Management Auto Color Noise Reduction Auto Movie ModeColor Decoding Audio TrebleBass BalanceAspect Mode AspectUse this function to select the Picture Format Aspect Ratio Auto AspectChannel Manager Chan. ManagerReception Band 23 ~Auto Channel Scan Press Thumb Stick or Press Exit to quit the menu ScanChannel ID will not be displayed when PIP is on Channel IDLocks LocksMovie Ratings TV Ratings Canadian Ratings English Chart Canadian Ratings EngCanadian Ratings FrnMenu Preference SetupUse Thumb Stick or to select the sub-menu of your choice Setup Image PowerMenu Background ScreenSet The Clock Set The ClockVideo Power Save Set The InputsBox Video 2 Auto LinkSet The Color System Set Event Timer Please Set Clock FirstWhen PIP Surf Mode is on, Closed Caption will not work Closed CaptionRGB on Screen Display Operation No SYNC. Signal Invalid Scan Freq TV/RGB Video Aspect Setup This feature allows you to adjust brightness in RGB Mode Color TemperatureRGB on Screen Display BrightnessReset Preset conditionEnhancer AspectPosition Auto AdjustFor current RGB format are adjusted automatically Horizontal Clock Clock PhasePhase to factory preset, for current RGB format Input Level Select the Input Level voltage between 0.7VBlack Side Panel Press down on Thumb Stick to select Black Side Panel ON/OFFCare of Your Hitachi Plasma Display Your Remote Control Do notUseful Info Ignition NoiseUseful Info Symptoms ControlPlug and Play Trademark AcknowledgmentAgency Regulatory Information Inputs OutputsHome Electronics Division Hitachi Way Chula Vista, CADigital Media Division Index QR55651
Top Page Image Contents